Table of Contents
Related Manuals for SMC Networks FieldServer FS-8700-10
Summary of Contents for SMC Networks FieldServer FS-8700-10
- Page 1 FieldServer FS-8700-10 SMC 2450 Driver Manual (Supplement to the FieldServer Instruction Manual) APPLICABILITY & EFFECTIVITY Effective for all systems manufactured after November 2015 Driver Version: 1.01 Document Revision:...
-
Page 2: Contact Information
FS-8700-10 SMC2450 Manual Contact Information: Thank you for purchasing the FieldServer. Please call us for Technical support of the FieldServer product. Contact Information: Sierra Monitor Corporation 1991 Tarob Court Milpitas, CA 95035 Contact number: +1 408 262-6611 +1 800 727-4377 Email: info@sierramonitor.com Website: www.sierramonitor.com... -
Page 3: Table Of Contents
FS-8700-10 SMC2450 Manual TABLE OF CONTENTS SMC2450 Description .......................... 4 Hardware/Software ..........................4 Supplied by Sierra Monitor Corporation for this driver ..............4 Provided by the Supplier of 3 Party Equipment................4 2.2.1 Required 3 Party Hardware ....................4 Hardware Connections ........................5 Configuring the FieldServer as a SMC2450 Client ................ -
Page 4: Smc2450 Description
FS-8700-10 SMC2450 Manual SMC2450 DESCRIPTION The SMC2450 driver allows the FieldServer to transfer data to and from devices over RS-232 using Sierra Monitor Corporation SMC2450 protocol. The FieldServer can emulate either a Server or Client. The information that follows describes how to expand upon the factory defaults provided in the configuration files included with the FieldServer. -
Page 5: Hardware Connections
FS-8700-10 SMC2450 Manual HARDWARE CONNECTIONS It is possible to connect a SMC2450 device to a RS232 port or RS485 port (using a converter). These ports just need to be configured for SMC2450 in the configuration file. 9-Pin Dsub Male Viewed from Front RJ-45 Plug Hook is Underneath Figure 1 - Generic Connection Diagram... -
Page 6: Configuring The Fieldserver As A Smc2450 Client
FS-8700-10 SMC2450 Manual CONFIGURING THE FIELDSERVER AS A SMC2450 CLIENT Refer to section 1 of the Configuration Manual for a description of the operation principle of the FieldServer. The following tables describe parameters that need to be filled out in the configuration file. For convenience, a few example parameters already exist in the supplied Configuration files. -
Page 7: Client Side Node Descriptors
FS-8700-10 SMC2450 Manual Example Client Side Connections Connections Port , Baud , Parity , Data_Bits , Stop_Bits , Protocol , Poll_Delay , 2400 , None , SMC2450 , 0.100s Client Side Node Descriptors Section Title Nodes Column Title Function Legal Values alphanumeric Node_Name Provide name for node... -
Page 8: Map Descriptor Example
FS-8700-10 SMC2450 Manual Map Descriptor Example. Client Side Map Descriptors Map_Descriptors Map_block_Name , Data_Array_Name , Data_Array_Offset , Function , node_name , Address , Length , Scan_Interval SMB_AO1 , DA_40000 , Rdbc , MOD2450 , 40001 , 10 SMB_AO2 , DA_41000 , Rdbc , MOD2450 , 41001... -
Page 9: Server Side Node Descriptors
FS-8700-10 SMC2450 Manual Server Side Node Descriptors Section Title Nodes Column Title Function Legal Values Up to 32 alphanumeric Node_Name Provide name for node characters Node_ID Node ID of physical server node Protocol Specify protocol used SMC2450 Example Server Side Nodes Nodes Node_name , Node_ID... -
Page 10: 4.8.1 Map Descriptor Example
FS-8700-10 SMC2450 Manual 4.8.1 Map Descriptor Example Server Side Map Descriptors Map_Descriptors Map_Descriptor_Name , Data_Array_Name , Data_Array_Offset , Function ,Node_Name , Address , Length SMB_AO1 , DA_40000 , Server , DEV1 , 40001 , 10 SMB_AO2 , DA_41000 , Server , DEV1 , 41001 SMB_AO3...
Need help?
Do you have a question about the FieldServer FS-8700-10 and is the answer not in the manual?
Questions and answers