Advertisement
Using the HMT-1Z1 with a Hard Hat
To get hard hat clips, visit shop.realwear.com.
1. Hook the Hard Hat Clips into the HMT-1Z1 band and snap them into place.
2. Slide the clips into the hard hat accessory slots; the HMT-1Z1 band should sit
outside of the hard hat's harness.
3. Put on the hard hat and if applicable, tighten until secure and comfortable.
4. To remove the HMT-1Z1 from the hard hat, pinch the clip fingers and push the clip out of
the hard hat slots.
A
B
C
D
Using the HMT-1Z1 without a Hard Hat
Attaching the Rear Pad
The Rear Pad snaps
onto the HMT-1Z1's
rear band; align the
openings on the Rear
Pad to the pegs on
the HMT-1Z1's rear
band, and snap into
place.
During operation, remove the Rear Pad to view
intrinsically safe regulatory information.
E
A
F
B
G
C
H
D
I
E
J
F
A
B
Attaching the Head Strap
Insert the end of the
strap into the inside
slot on both sides
of the HMT-1Z1 as
shown. Fold the end
back on itself and
secure using the
velcro patch.
Charging the HMT-1Z1
1. Connect the Micro USB
charging cable as shown.
2. Connect the cable to the wall
charger as shown and plug in.
The power button will blink RED when
charging and turn GREEN when fully
charged.
Safety Warning Only use the Provided Charger
G
H
I
J
The USB cable included with the HMT-1Z1 is a special micro-USB cable for data transfer and charging. It
C
D
E
F
G
H
includes a safety box that protects the HMT-1Z1's safety circuits from power surges. These surges can
damage the HMT-1Z1 and may occur when connecting the HMT-1Z1 to computers, wall chargers, car
chargers, and other power sources that are not certified or approved as intrinsically safe. It is the only cable
approved for charging the HMT-1Z1 and for moving files to and from the HMT-1Z1.
Generate a QR Code for Configuration
1
2
3
4
Use the RealWear Companion App
Scan this code from your smartphone to
download RealWear Companion.
1. Download the RealWear Companion app from
the Google Play or Apple App Store.
2. Launch RealWear Companion from
your smartphone.
3. Select Configuration.
4. Select First Time Setup.
5. Follow the steps in the application in enter
information and generate a QR Code.
I
J
5
6
7
8
9
10
Use realwear.setupmyhmt.com
OR
1. Go to realwear.setupmyhmt.com from your
computer or mobile device.
2. Select Configuration.
3. Follow the prompts to enter information and
generate a QR Code.
Advertisement
