Outputs - B&K series II Owner's Manual

Here is a typical preamplifier to amplifier setup:
;4 E 4;
;>
8= ?D C
Five way binding posts are provided. There is one pair provided for each channel. They
are designed to accept a banana-type plug, spade-lug connector (shown below), terminal
posts, and bare wire, and they are color coded for easy identification. The positive (+)
post should always be connected to the speakers (+) jack. The negative (-) post should
always be connected to the speakers (-) jack.
Here is a typical amplifier output setup:
? ; D B 
;4 E 4; ! ;4 E 4; "
7 8 ;> 7 8 ;> 7 8
8= ?D C ! 8= ?D C "

OUTPUTS

Spade connector
> DC ? D C > DC ? D C > DC ? D C
< 8= D B ? ; D B  < 8= D B ? ; D B  < 8= D B
Page 6
;4 E 4; # ;4 E 4; $ ;4 E 4; %
;> 7 8 ;> 7 8 ;> 7 8
8= ?D C # 8= ?D C $ 8= ?D C %
Banana jack
> DC ? D C > DC ? D C > DC ? D C
? ; D B  < 8= D B ? ; D B  < 8= D B ? ; D B 
;4 E 4; &
;> 7 8
8= ?D C &
> DC ? D C
< 8= D B ? ; D B  < 8= D B
P/N 13009 Rev.0102