User Guide; Balls Maintenance Since Their First Use - Pascal Box User Manual

2. User Guide

2.1 Balls maintenance since their first use (recommended)
1
2
4
Introduce the balls in the container
and close the cover tightly to seal
it completely*. It is best if the balls
put into the container come from the
same original pack.
*Once pressurized, if you detect that the level
of pressure decreases with time, the cover
has not been closed properly.
Remove the cover from the injection
valve and insert the pump. Make
sure the pump's lever is lowered
when placing it. Lift the pump's
lever and insert pressure until
the indicator's needle reaches the
corresponding green zone (padel
or tennis). Lower the lever, remove
the pump (if necessary, remove any
extra pressure by pressing the inside
of the valve) and place the tool cap.
3 Maintain PASCAL BOX pressurized
until playing the next
To completely recuperate
pressure lost during one match it
takes between 12 and 72 hours*,
depending on the ball's quality and
condition.
* You can use the balls before this period,
keeping in mind that they may not have
completely recuperated their
pressure.
4 Before opening the cover, completely
release the interior pressure by
pressing on the middle of the valve*.
Unscrew the cover and remove the
balls.
They'll regain the same pressure as
their first day!
* It is important to remove all of the pressure
before opening PASCAL BOX to avoid
possible damages. In any case, opening it
when pressurized requires a lot of strength.
match.
the
original
5