1. Manuals
  2. Brands
  3. Car Mate Manuals
  4. Baby & Toddler Furniture
  5. AILEBEBE PAPATTO
  6. Operating instructions manual

Car Mate AILEBEBE PAPATTO Operating Instructions Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
2071311A
Operating Instructions
PAPATTO is designed for safety of a child. If PAPATTO is installed or used improperly, the child may be
exposed to risk of serious injury or death in a collision.
Read these operating instructions carefully to understand the content, and use PAPATTO properly.
We shall not be held responsible for any trouble caused by incorrect installation or usage.

Advertisement

Table of Contents
loading

Summary of Contents for Car Mate AILEBEBE PAPATTO

  • Page 1 2071311A Operating Instructions PAPATTO is designed for safety of a child. If PAPATTO is installed or used improperly, the child may be exposed to risk of serious injury or death in a collision. Read these operating instructions carefully to understand the content, and use PAPATTO properly. We shall not be held responsible for any trouble caused by incorrect installation or usage.
  • Page 2 Child’s weight and seat mode Select the suitable mode for your child’s weight. If you don’t, the performance and Caution safety of PAPATTO may be compromised. 15kg 18kg 22kg 36kg Selectable modes Child Seat mode Junior Seat mode Booster Seat mode 75cm 95cm 100cm...

  • Page 3: Table Of Contents

    Table of Contents Check the contents HOW TO USE IN THE BOOSTER SEAT MODE Parts identification and supplied parts ....4 Changing the mode How to carry PAPATTO ........7 (From Junior Seat mode to Booster Seat mode) ..42 For safe usage ............8 Seating your child on PAPATTO (Booster Seat mode) ...

  • Page 4: Parts Identification And Supplied Parts

    Parts identification and supplied parts ▋Body " &...
  • Page 5 * Some items may be different in specifications or not be supplied with some models, depending on the grade. ▋Passenger seat in the vehicle " Headrest # Headrest adjustment lever The parts around the passenger seat are named $ Tether belt as follows in these operating instructions.
  • Page 6 Parts identification and supplied parts * Some items may be different in specifications or not be supplied with some models, depending on the grade. Refer also the user’s guides bundled with some of the supplied parts. " Side covers ▋Supplied parts # Head and backrest cover "...

  • Page 7: How To Carry Papatto

    How to carry PAPATTO • Do not carry PAPATTO with the child seated. Note • To carry PAPATTO, first retract the connectors. How to retract the connectors...

  • Page 8: For Safe Usage

    For Safety ▋Checking adaptation use ( PAPATTO is approved in UN (ECE) R44/04 as a universal device for G I from 9 to18 kg) and a use ( universal and semi-universal device for GII III from 15 to 36 kg). For a child from 9 to 18 kg in weight PAPATTO is designed in accordance with “ISOFIX”...
  • Page 9 For a child from 15 to 36kg weight Install PAPATTO on a passenger seat equipped with a 3-point system seatbelt that is approved in • accordance with UN (ECE) R16 or other standard of equal level. Be sure to use the seatbelt of the vehicle. •...
  • Page 10 For Safety ▋Safety Precautions In this user’s guide and on the product, safety precautions are shown as follows: Be sure to understand these statements. Danger Risk of death or serious injury if not observed. Warning Possible exposure to risk of serious injury or death if not observed. Caution Risk of injury or property damage if not observed.
  • Page 11 Notes for installation Danger Do not use PAPATTO in any vehicle or on passenger seat not suitable for it. • If PAPATTO is not installed correctly or is not used properly, its performance may be compromised. If you install PAPATTO in any other vehicle, check the adaptability again. Do not install or remove PAPATTO while the vehicle is moving.
  • Page 12 For Safety Notes for installation Warning Do not slide or recline the passenger seat on which PAPATTO is installed. • PAPATTO cannot be fixed firmly, and its performance may be compromised. Caution PAPATTO may leave marks or impressions after it is removed. Do not install PAPATTO in a vehicle If the connector of PAPATTO has become deformed.
  • Page 13 Tongue Warning Do not use PAPATTO if the belt of the buckle is slack when the tongue is inserted in the buckle. Check that the seatbelt is not loose or twisted. • PAPATTO cannot be installed properly, and its performance may be compromised. Buckle Shoulder seatbelt keeper Remove the buckle of the vehicle from its holder...
  • Page 14 For Safety Notes for handling Danger Do not take apart, lubricate, or modify PAPATTO or replace any part with one other than specified. • The performance and safety of PAPATTO may be compromised. Do not use PAPATTO if it has received impact. • Its strength may be compromised even if its appearance has not changed.
  • Page 15 For safety of the child seated Warning Pass the shoulder belts through the holes to leave them at a suitable height for the child’s physical size. • If the length of the shoulder belts does not suit the child’s shoulders, the performance and safety of PAPATTO may be compromised.
  • Page 16 For Safety For safety of the child seated Warning Do not carry PAPATTO in the vehicle if it is not installed on the car seat. • It may be a cause of injury of a passenger in a sudden stop or collision. Use the shoulder belt and waist belt each at its correct position, and do not twist or loosen them.
  • Page 17 Do not leave the child in the vehicle alone. • A guardian must stay in the vehicle with the child. Especially in summer, it will become hot inside the vehicle and the child may suffer heatstroke. Also, he/ she may encounter unexpected trouble. The seatbelt may choke him/her, for example.

  • Page 18: In An Emergency

    For Safety In an emergency Press the buckle release button and remove the shoulder belts from Buckle around the child. Take refuge in a safe place. Release button...

  • Page 19: How To Use In The Child Seat Mode

    HOW TO USE IN CHILD SEAT MODE For a child from 9 to 18 kg in weight (Reference: 75 to 100 cm in height, 1 to 4 years old)
  • Page 20 Installing in the vehicle Passenger seat on which to be installed Installation is explained in these operating instructions, taking the example of the passenger seat on the left side (" ) as an example. "...
  • Page 21 Completion drawing Tether belt Attachment for the If the headrest fixing belt (Top tether is removable, anchorage) remove it. Connector Insertion guide ISOFIX lower anchorage Names and locations may be differ, depending on the vehicle. Be sure to check the owner’s manual for the vehicle. Some vehicles or passenger seats may not require use of the insertion guides, or there may be a case in which the insertion guides cannot be connected to the anchorages of the seat.

  • Page 22: Installing Papatto In The Vehicle

    Installing PAPATTO in the vehicle Take the insertion guides (yellow) out of the Adjust the reclining of the package and insert them into the ISOFIX lower passenger seat. anchorage of the vehicle.* The maximum reclining angle of PAPATTO is about 120 degrees. If PAPATTO is reclined farther than 120 degrees, Upside its performance may be compromised in a collision.
  • Page 23 Extend the ISOFIX Connector. Install on the passenger seat. Attach the connector to the ISOFIX lower anchorage with a click, and While keeping the connector lever pressed between two fingers in the directions of the push PAPATTO rearward to be attached firmly to the backrest of the arrows, slide it rearward.
  • Page 24 Installing PAPATTO in the vehicle The location of the tether belt anchorage may be differ, Information depending on the vehicle. Attaching the tether belt Check its location in the owner’s manual for the vehicle. Extend the tether belt. Engage the tether belt Draw and tighten the "...
  • Page 25 Checking after installation If the vehicle’s headrest is removable, remove it. $ The tether belt is fastened and not loosened. # The rear of PAPATTO is (The indicator lights in green.) attached firmly to the backrest of the passenger seat. “"...

  • Page 26: Seating Your Child On Papatto (Child Seat Mode)

    Seating your child on PAPATTO (Child Seat mode) Release the buckles and extend the shoulder belts.
  • Page 27 Insert the tongues Seat the child. Tighten the shoulder belts. into the buckle. CLICK!

  • Page 28: Confirming After Seating

    Confirming after seating the child $ The shoulder belts are tightened and one or two After seating the child, check the following. fingers of an adult can be inserted between the shoulder belts and the child’s chest. " The shoulder belts pass from the child’s shoulders vertically to the backrest.

  • Page 29: Removing Papatto From The Vehicle

    Removing PAPATTO from the vehicle Release the tether belt. Retract the ISOFIX connectors. Slide them to the end. (The retracted connectors can Button be protected.)
  • Page 30 Removing PAPATTO from the vehicle Remove PAPATTO from the passenger Information Rolling up the tether belt seat. $ Roll up the extra length of the tether belt. " Engage the end with the hanger. # Draw and fix the belt.

  • Page 31: How To Use In The Junior Seat Mode

    HOW TO USE IN JUNIOR SEAT MODE For a child from 15 to 36kg weight (Reference: 95 to 145 cm in height, 3 to 11 years old)

  • Page 32: Changing The Mode (From Child Seat Mode To Junior Seat Mode)

    CHANGE Changing the mode (From Child Seat mode to Junior Seat mode) [Changing the mode] Retract the buckle and buckle cover. Child Seat mode # Take off the loops from the loop holders " Unhook the buckle cover. on the bottom of the base cover and turn over the base cover from the front.
  • Page 33 $ Push the buckle and buckle cover beneath % Restore the base cover and hang the loops on the base cover. the loop holders on the bottom of the base.
  • Page 34 CHANGE Changing the mode (From Child Seat mode to Junior Seat mode) Retract the shoulder belts. " Extend the shoulder belts all the way and pull up the # Unhook the waist parts of the backrest cover. (Left headrest to maximum. and right) $ Take off the backrest cover and turn it over.
  • Page 35 % Slide down the shoulder belt retracting lever until it & When the shoulder belts are pulled to the end, put clicks. them under the belt hooks.
  • Page 36 CHANGE Changing the mode (From Child Seat mode to Junior Seat mode) Retract the tongues. # Check that the shoulder belt is not $ Restore the base " Open the seat cover as shown in the loosened, and insert the tongue cover as shown in the illustration.
  • Page 37 % Restore the backrest cover and hook it. (4 hooks) ' Retract the shoulder belt adjuster, as shown & Hook the waist parts of the backrest cover. (Left and right) in the illustration. * Adjust the height of the headrest to suit the child. &...

  • Page 38: Installing In The Vehicle

    Installing PAPATTO in the vehicle Completion drawing If the vehicle’s headrest is removable, remove it. * PAPATTO is usable without the tether belt. Connector * If you change the reclining Insertion guide angle while the tether belt is attached, adjust the length ISOFIX lower of the tether belt.

  • Page 39: Seating Your Child On Papatto (Junior Seat Mode)

    Seating your child on PAPATTO (Junior Seat mode) Pass the shoulder Seat the child. Pass the waist seatbelt. seatbelt. " Pass the shoulder seatbelt through the " Seat the child deeply. " Pass the waist seatbelt under the waist belt shoulder belt guide.

  • Page 40: Confirming After Seating

    Confirming after seating the child $ The shoulder seatbelt is adjusted to suit the child. # The shoulder and waist seatbelt are not loose or twisted. " The waist seatbelt holds the child’s pelvis.

  • Page 41: How To Use In The Booster Seat Mode

    HOW TO USE IN BOOSTER SEAT MODE For a child from 22 to 36kg in weight (Reference: 125 to 145 cm in height, 7 to 11 years old)

  • Page 42: Changing The Mode

    CHANGE Changing the mode (From Junior Seat mode to Booster Seat mode) [Changing the mode] Remove the seat from PAPATTO. * First extend the connectors of PAPATTO to prevent it from tipping rearward. Junior Seat mode " Waist belt guide Booster Seat mode "...

  • Page 43: Seating Your Child On Papatto (Booster Seat Mode)

    Seating your child on PAPATTO (Booster Seat mode) Pass the shoulder Seat the child. Pass the waist seatbelt. seatbelt. " Pass the waist seatbelt under the waist Seat the child deeply. seatbelt guide and insert the tongue into the buckle. # Pull up and tighten the waist seatbelt.

  • Page 44: Confirming After Seating

    Confirming after seating the child # The shoulder and waist seatbelt are not loose or twisted. " The waist seatbelt holds the child’s pelvis.
  • Page 45 Cleaning Restoring the mode...

  • Page 46: Removing The Cover

    Removing the cover Unhook the body cover. (Left and right) (Left and right)
  • Page 47 Remove the cover from the body and remove the cushions from the cover. Wash the body cover. * They may be different in specifications or not be supplied with some models, depending on the grade.

  • Page 48: Cleaning

    Cleaning ▋Cleaning Notes on cleaning After removing the covers, clean each part as stated below. Machine wash cool, delicate cycle. To clean the cover or cushion, which cannot • be washed, wipe with a cloth soaked in neutral Do not bleach. detergent diluted with water and wrung out tightly.

  • Page 49: Attaching The Covers

    Attaching the covers * Some items may be different in specifications or not be supplied with some models, depending on the grade. Attach the side covers. "...
  • Page 50 Attaching the covers Attach the seat cover. " Return the seat cushion inside the seat # Place the cover on the seat from its front side and hook cover, as shown in the illustration. at the back of the belt guide. (2 hooks)
  • Page 51 $ Engage the rear side of the cover with the % Hang the loops on the rear front of the cover on the convex parts on the rear side of the seat. loop holders on the bottom of the base.
  • Page 52 Attaching the covers # Put on the head cover and fix it, as shown in the illustration. $ Hook the 4 hooks. Attach the backrest cover. " Return the headrest and backrest cushion to PAPATTO, as shown in the illustration. Direct the thicker side downward.
  • Page 53 % Hook the backrest cover. (4 hooks) & Hook the waist parts of the backrest cover. (Left and right) ' Last of all, draw out the shoulder belt adjuster, as shown in the illustration. * Some of the parts may be different in specifications or not &...

  • Page 54: (From Booster Seat Mode To Child Seat Mode)

    CHANGE Restoring the mode (From Booster Seat mode to Child Seat mode) " Pull out the buckle # Take off the backrest cover $ Lift the shoulder belts until cover. and turn it over. they click. Booster Seat mode Child Seat mode...
  • Page 55 ' Hold the waist belt guides and % Engage the seat with & Pull out the buckle from under the seat. push down on the rear side of the tabs at the front of Pull out the waist belt. Be careful not to pinch it the seat.
  • Page 56 CHANGE Restoring the mode (From Booster Seat mode to Child Seat mode) ( Restore the backrest cover and hook it. (4 hooks) + Last of all, draw out the shoulder belt ) Hook the waist parts of the backrest cover. (Left and right) adjuster, as shown in the illustration.

  • Page 57: Specifications

    Specifications Dimensions (H × W × D): H590 × W430 × D525 mm (The headrest is in its lowest position, and the ISOFIX connectors are retracted.) Weight: 10 kg Body materials: Polypropylene, polyamide, polyacetal, ABS Body cover: Polyester, urethane foam Body cushion: Urethane Safekeeping for PAPATTO Cover it with any sack and keep it where it will be cool and out of direct sunlight.
  • Page 58 MEMO...
  • Page 59 MEMO...

  • Page 60: Where To Contact

    PAPATTO Where to contact CAR MATE MFG. CO., LTD. 5-33-11, Nagasaki, Toshima-ku, Tokyo 171-0051 Japan E-mail: int@carmate.co.jp Tel: +81-3-5926-1226 20180327...

Table of Contents