Advertisement
2.2 Recuperation of deflated balls
Procedure to recuperate the pressure of a flat ball is
different than that of a new ball. In this case you must
gradually present the ball to the pressure throughout
several days in order to avoid it from deforming.
In order to recuperate flat balls, they must have had a
regular use and not be badly deteriorated (both the
rubber and felt must be in good condition).
6
1
After having put the balls in the
container and closed the cover
firmly, use the pump to inflate
the necessary pressure to take
the indicator to 3/4 of the
orange zone (position 1).
Keep the Pascal Box at this
point for 72 hours to re-load
the inside of the ball at this
same pressure.
2
Then
it
returns
to
pressure until the indicator
reaches the beginning of the
"Paddle" green zone (position
2) (independent of the type of
ball).
Keep
the
Pascal
pressurized at this point for
another 72 hours.
After
completing
step
3
take the needle to the ball´s
corresponding green zone and
keep the Pascal Box at this
point for 72 hours.
The balls will have recuperated
their reglementary pressure
and bounce like on the first
day.
NOTE: If at any time during this procedure you observe that a ball deforms,
it is a sign that it is no longer in good conditions to be recuperated, so you
must dispose of it.
inject
Box
2,
7
Advertisement
