OBaby Sophie Instructions Manual

OBaby Sophie Instructions Manual

Baby crib
Hide thumbs Also See for Sophie:

Advertisement

Sophie Crib
IMPORTANT
PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE USING THIS PRODUCT
KEEP FOR FUTURE REFERENCE

Advertisement

Table of Contents
loading

Summary of Contents for OBaby Sophie

  • Page 1 Sophie Crib IMPORTANT PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE USING THIS PRODUCT KEEP FOR FUTURE REFERENCE...
  • Page 2 Thank you for choosing O Baby. To ensure that your crib is used in accordance with these instructions, please read them fully and retain for future reference. If you have any problems please contact O Baby - info@obaby.co.uk or 0845 078 0290 BEFORE ASSEMBLY - Unpack all the parts and identify them against the fittings and components lists.
  • Page 3 Parts A. Allen key x 1 B. Wooden dowels x 2 C. Short assembly screws x 8 D. Long assembly screws x 4 E. Barrel nuts x 4 F. Bolts x 2 G. Base bracket nuts x 2 H. Wooden Spacers x 2 I.
  • Page 4 Assembling your crib stand When putting your new crib together, do not tighten all the fittings until you have put the whole crib together. STEP ONE Fit the Swinging lock to the stand with the hole using 2 x screws & a Phillips screw driver.
  • Page 5 Assembling your crib Assembling the Crib STEP SIX Start with a crib end & a crib side rail Using 2 small assembly screws, fit these panels together using your allen key. STEP SEVEN Once you have fitted one side, fit the second rail to this end, with 2 more small assembly screws.
  • Page 6 Assembling your crib STEP EIGHT Once you have both side rails on the crib, fit the crib base by sliding it in to the rail grooves. STEP NINE Fit the second crib end using the smaller assembly screws & allen key.
  • Page 7 Fitting the crib to the stand STEP ELEVEN Now you have the crib & stand built up, Fit together starting by aligning the crib centre hole with the hole at the top of the stand. Put the wooden spacer in between the stand & the crib, then slide the sleeve through the holes.
  • Page 8 Using your crib To stop the crib from swinging, lock into place by turning the knob and allowing the spring to click in. To allow the crib to swing, turn the knob and pull out. Page Seven...
  • Page 9 INSTRUCTIONS FOR SAFE USE & MAINTENANCE 1. Always place your crib on a stable horizontal surface 2. Do not allow young children to play unsupervised in the vicinity of the crib. 3. When your child is left unsupervised in the crib, always ensure the crib is locked in the fixed position.

Table of Contents