Step-By-Step Instructions For Using The Manual Functions - Ninja CS960A Owner's Manual

Cooking system with auto-iq
Table of Contents

Advertisement

Step-by-Step Instructions for Using Manual Functions
WARNING: Place the vent hole on the lid facing away
from you.
WARNING: Use oven mitts when moving the unit,
opening the lid, and inserting or removing food.
CAUTION: Use extreme caution when removing the
lid after cooking. Serious burns can result from
the steam inside. ALWAYS lift and tilt the lid away
from you when removing, using care to ensure
water drips back into the cooking pot.
ACCUTEMP Slow Cook Low and High:
1
Place the cooking pot into the unit's main housing. Plug in the
unit and press the Power button to turn it on.
2
Place ingredients in the cooking pot. Cover the pot with the lid.
NOTE: DO NOT fill the pot more than 2/3 full.
3
Press the ACCUTEMP SLOW COOK button to select either LOW
or HIGH. The button will default to HIGH. Pressing the button
again will set it to WARM. Pressing it a third time will set it to
LOW. Pressing it a fourth time will cycle it back to HIGH.
NOTE: The Temp/Time display will default to 4:00 (hours) on the
High setting and 8:00 on the Low setting. You can increase or
decrease the time by 15-minute increments from 30 minutes up
to 12 hours by using the adjustment knob.
NOTE The temperature function is not available in Slow Cook
mode.
NOTE: If you lift the lid while cooking, it could result in heat loss
that will require a longer cooking time.
4
Once you have selected LOW or HIGH and set your desired
cooking time, the START/STOP button will illuminate and the unit
will begin the cooking cycle after 3 seconds. You can also press
the START/STOP button before 3 seconds is up to start cooking.
5
When the countdown timer reaches zero, the unit will beep
3 times and then switch to Stay Warm for up to 12 hours.
Alternately, you can press the START/STOP button to stop
cooking prior to the end of your set time (the unit will NOT
switch to Stay Warm in this case).
NOTE: If you press the START/STOP button accidentally, you can
press it again within 5 seconds to resume the set cooking time.
6
When you are ready to turn off the unit, press the Power button.
The Temp/Time display will show the word OFF.
NOTE: If you accidentally press the Power button, you can press
it again within 5 seconds to resume all prior settings.
Stay Warm and Auto Shutoff for ACCUTEMP Slow Cook
Low and High:
As a safety feature, the unit will automatically shut off based on the
setting that has been selected.
When in the ACCUTEMP Slow Cook Low or High modes, at the end of
the cooking cycle the unit will automatically switch to Stay Warm for 12
hours. At the end of the 12 hours, the unit will automatically shut off.
ACCUTEMP Slow Cook Warm
NOTE: Use ACCUTEMP the Slow Cook Warm setting ONLY to keep
already-hot, fully cooked food warm. DO NOT attempt to cook cold or
room-temperature ingredients on the ACCUTEMP Slow Cook Warm
setting.
1
Place the cooking pot into the unit's main housing. Plug in the
unit and press the Power button to turn it on.
2
Place the cooked, hot food into the cooking pot and cover with
the lid.
NOTE: DO NOT fill the pot more than 2/3 full.
3
Press the ACCUTEMP SLOW COOK button. It will default to HIGH.
Press it 1 more time to select WARM.
NOTE: The Temp/Time display will default to 6:00 (hours) on
the WARM setting. You can increase or decrease the time by
15-minute increments from 30 minutes up to 12 hours by using
the adjustment knob.
NOTE: The temperature function is not available in Slow Cook
mode.
4
Once you have selected WARM, after 3 seconds your unit will
start. You can also press the START/STOP button before 3
seconds is up to start warming.
5
When the countdown timer reaches zero, the unit will beep
3 times and then switch to Stay Warm for up to 12 hours.
Alternately, you can press the START/STOP button to stop
warming prior to the end of your set time (the unit will NOT
switch to Stay Warm in this case).
NOTE: If you press the START/STOP button accidentally, you can
press it again within 5 seconds to resume the set warming time.
6
When you are ready to turn off the unit, press the Power button.
The Temp/Time display will show the word OFF.
NOTE: If you accidentally press the Power button, you can press
it again within 5 seconds to resume all prior settings.
Stay Warm and Auto Shutoff for ACCUTEMP Slow Cook
Warm:
As a safety feature, the unit will automatically shut off based on the
setting that has been selected.
When in the ACCUTEMP Slow Cook Warm mode, the unit will
automatically switch to Stay Warm for 12 hours. At the end of the 12
hours, the unit will automatically shut off.
ninjakitchen.com
10

Advertisement

Table of Contents
loading

Table of Contents