Advertisement
Advertisement
Table of Contents
Summary of Contents for RDX 12PC
- Page 1 RDX 12PC SPEEDBALL PLATFORM SET USER MANUAL...
- Page 2 In the event should you find this product has either a defective or a missing part, do not use substitute parts or try to use the unit in an incomplete form. Please contact RDX Sports for a replacement.
- Page 3 9. Before using this equipment, always do stretching exercises to warm up. 10. Use this equipment only for its intended use as described in manual. 11. Always wear appropriate workout clothing and shoes when exercising. DO NOT WEAR ROBES OR OTHER CLOTHING THAT COULD BECOME CAUGHT IN THE EQUIPMENT. 12.
- Page 4 Use mallet to insert G. Drill Holes 65MM deep to inset I. Check all fixing before use ASSEMBLY INSTRUCTIONS...
- Page 5 MOUNTING INSTRUCTIONS There are two options you can use when mounting the Speed Bag Platform. Cement Mount: Assemble unit first..Determine how high to mount the unit: How do I know how high to mount the frame? Good question! You need to identify the range of height for the users that will be using the Speed Bag Platform.
- Page 6 3. Once hole is drilled, take mounting plug and test the size of hole. You should not be able to slide the plug in without resistance. Note: it’s better to have a slightly smaller hole and use a hammer to tap it in then it is to be able to slide it in and out with your hands. 4.
- Page 7 4. Start to tighten all 4 bolts going from corner to corner to corner to corner until all sides are firmly tightened. Helpful hint: Do not tighten one bolt all the way and then proceed to the next. Tighten evenly as you work in one direction. Wood lag bolts sunk into studs Wood lag bolts provided sunk into wood when finished, grab the end of the platform and pull for any signs of “play”.
Need help?
Do you have a question about the 12PC and is the answer not in the manual?
Questions and answers