Verv ABCB03 Quick Start Manual

Quick Start Guide
Let's Get Started
To kick-start the set-up, please make sure:
You are by your You have a
electricity or strong Wi-Fi
smart meter connection
If you would prefer to watch a video on how to
set up your hub, please visit www.verv.energy/install
Installation
Step 1
Locate the cable between your electricity meter and mains
fuse box. This is located on the far right for a 4 cable meter.
You have a
power socket
nearby
In the Box
Step 2
Open the blue sensor and attach it to the cable indicated
in step 1 in the position shown. The arrows on the sensor
should be pointing down, away from the meter.
cable is damaged, frayed or appears unsafe however, please do
not touch the unit. Contact us or seek professional advice.
If your electricity meter looks
different to the diagram and you
are unsure as to which is the
correct cable - please contact us
and we'll be happy to help
Verv Hub Sensor (Current Clamp)
Power Cable User Guide
You can gently attach the sensor to the cable yourself. If your