1. Manuals
  2. Brands
  3. Rebar Tools Manuals
  4. Tools
  5. DBR-25WH
  6. Handling instructions manual

Rebar Tools DBR-25WH Handling Instructions Manual

Bender straightener
Hide thumbs
1
2
3
4
5
6

Advertisement

Table of Contents

DBR – 25WH
REBAR STRAIGHTENER
HANDLING INSTRUCTIONS
READ THESE INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO USE REBAR
STRAIGHTENER
Ignorance of proper operating procedures can lead to accidents.
If in doubt of any procedure, contact your local authorized agent.
DBR-25WH Inst Manual.indd

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DBR-25WH and is the answer not in the manual?

Questions and answers

Summary of Contents for Rebar Tools DBR-25WH

  • Page 1 DBR – 25WH REBAR STRAIGHTENER HANDLING INSTRUCTIONS READ THESE INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO USE REBAR STRAIGHTENER Ignorance of proper operating procedures can lead to accidents. If in doubt of any procedure, contact your local authorized agent. DBR-25WH Inst Manual.indd...
  • Page 2 To avoid possible electric shock, do not handle the elry. Restrain long hair. The use of a safety helmet DBR-25WH with wet hands, or use in the rain or other and rubber soled boots are strongly recommended. damp places. Be aware of all power lines, electric...
  • Page 3 MAINTAIN REBAR STRAIGHTENER WITH CARE- If voltage is too high, the motor will burn out, CARE if voltage is too low, insufficient power will be gener- Inspect rebar straightener before each use. Faulty or ated. loose bending hook could possibly result in personal injury.

  • Page 4: Operation

    ing operation. (Be particularly careful in summer, when the aluminum pumpcase heats up quicker. If a drop in power is observed and motor is unusu- TO PULL ally hot, check the carbon brushes. Set the hook in the correct starting position , make sure that the mode control lever is in the “B”...

  • Page 5: Oil Change

    everyday. Failure to maintain the oil at proper levels Unplug the unit from the power source. Remove will result in a drop in pressure and loss of the benders the oil plug and packing. Turn the unit over and hydraulic power. drain oil into an appropriate receptacle.
  • Page 6 DBR-25WH Portable #8 Rebar Bender The DBR-25WH is a portable heavy-duty electric/hydraulic rebar bender and straightener. It helps save valuable man-hours by cleanly and efficiently bending or straightening bent rebar. It func- tions as a simple 90-degree portable electric rebar bender. The in- terchangeable bending hook covers rebar diameters from #4 to #8 grade 60.

Table of Contents