Advertisement
PRECAUTIONS
Read and heed the instructions and the cautions listed in this manual
Store this manual in a safe place for future reference.
Pictorial indication: Please understand the meaning of the following pictorial indications and heed the instructions. Otherwise it may cause injuries
to users, others and property damages.
This indicates that it may cause serious injuries to human body or death if it is
Warning
ignored.
This symbol indicates "Prohibited actions" and is accompanied with exact nature
of "Prohibited actions" with this "circle with crossed out line symbol".
Please make notice of the instructions provided.
Concrete instructions are illustrated.
This remark shows the possibility of injuiry on human and physical damange if ignore
Warning
or wrong handling in sprite of this remark.
If there is thunder, please do not touch the antenna and cable. This action may cause an electrocute.
This remark shows the possibility of injuiry on human and physical damage if ignore
Caution
or wrong handling in sprite of this remark.
After storm or hurricane, a malfunction or loose fitting of antenna setting may happen. Neglect such situation
may cause damage and human injuiries. Please consult with professional engineer or service company.
Do not hang laundries to antenna or metal fittings which may cause injuries due to fallen or broken
antenna.
keep
away
keep away from power lines
work in the safe environment
signal
more
than
1 mm
more
than
1 mm
Locate the receiving
Locate the receiving
Locate the receiving
antenna away from
antenna away from
antenna in a direct
heavy traffic and (or)
other antenna as far
line of sight to the
high-tension wires.
as possible.
transmitting stations.
Warning
Avoid injuries while installing
Caution
direction
signal
height
turn more
to the
left!
Locate the antenna
Secure the coaxial cable
(place, height &
away from eavestrough
direction) where you
and roof so that it does not
can get the best
touch them in any weather
reception.
conditions.
Transmission Station
Arm
Supporting
Stay
Metal Fitting
Insulator
(not included)
Mast
(not included)
Assembling supporting
Stay
Loosen bow nut, insert
stay at Arm Band A to
ensure bolt head is
inserted up to the end.
Fasten bolt nut.
Assembling of driven elements
Fit the prong on the
feeder assembly into
the hole on the arm
coaxial
and tighten the wing
cable
nut.
Prong
Feeder
Assembly
Arm
Wing
Nut
Positioning
hole
How to assemble antenna
Assembling reflector
Open arms up and down
to the lock-in position
Wave Receiver
Radiator
Reflector
Make sure the arms are in the
Coaxial cable
lock-in positions and then gently
(not included)
tighten the wing nut.
To TV set
Assembling antenna stay
Fit the screw head for the
positioning in the slot
Arm
on the arm band, then tighten
the wing nut.
Arm
Band A
Bolt Head
Wing Nut
Supporting
Stay
Attaching to the mast
Assembling for horizontal
polarized signal
Make sure all screws and nuts are
tighten before attaching it to the mast.
Note
These slots are for packaging
Mast fixing plate
Reflector
Stay
Wing
Nut
Mast
wing nut
snap lock
mechanism
Wing Nut
Arm band
B
Arm
Stay
Assembling for vertical
polarized signal
When setting it vertically,
losen the wing nut from the
stay. Rotate it 90
as shown
below.
Wing Nut
Stay
fixing screws
Rotate 90
Advertisement
