Advertisement
OPERATING INSTRUCTIONS
Models 337-13H & 357-13HE
Gas Tank
Recoil Rope
Key Switch
(if equipped with
electric start)
Side Discharge
Frame
Cutting
Tooth
Cutter Wheel
Tooth
Pocket
Know Your Dosko:
BEFORE GRINDING STUMPS
• Be aware of all underground utilities before grinding stump.
STARTING GRINDER
• Press down on handle bar so that cutter wheel is off the
ground.
• Pull out on-off switch (located on control panel).
• Turn switch to "On" position (located on engine).
• Pull choke if engine is cold (located on engine).
• Set throttle about ¼ open (located on engine).
• Engage operator presence handle by pushing handle
(small diameter bar) towards "Handle Bar Bow."
• Recoil: Pull recoil rope to start engine (located on engine).
Electric: Turn key to start engine (located on engine).
• When engine starts — close choke.
20195 South Diamond Lake Road, Suite 100 • Rogers, MN 55374 • USA (Toll-Free): 866-298-3659 • International: + 1-763-428-0302 • www.dosko.com
20195 South Diamond Lake Road, Suite 100 • Rogers, MN 55374 • USA (Toll-Free): 866-298-3659 • International: + 1-763-428-0302 • www.dosko.com
Handle Bar Bow
Adjustable
Brake Lever
Air Filter
Engine Throttle
& Choke
Discharge Flap
Disc
BEFORE STARTING OR USING THIS MACHINE, READ AND REVIEW THIS SAFETY SHEET! BE AWARE OF ALL POTENTIAL DANGERS,
PROTECT WINDOWS AND VEHICLES FROM POSSIBLE FLYING DEBRIS AND BE AWARE OF ALL NECESSARY SAFETY PRECAUTIONS!
GRINDING STUMP
• Push grinder to stump so that the stump is located just in
front of the cutter wheel.
• Using the brake lever — lock the one wheel.
• Pull throttle to full open (located on engine).
• Lower the cutter wheel slowly using a left-to-right motion to
grind the stump.
• Grind stump to desired depth.
• Handle bar may have to be adjusted to accommodate for
height of stump or desired depth. Raise or lower handle bar
to a comfortable safe position.
• Reposition grinder further on stump and begin this process
again.
TO TURN FOR A SHORT PERIOD AFTER ENGINE IS
SHUT OFF.
Operator
Presence
Handle
Operating
Zone
Control Panel with
On-Off Switch
Handle Bar
Pin Adjustment
Handle Bar
Belt Guard
Battery Box
(if equipped with
electric start)
ALWAYS
THINK
SAFETY
: CUTTING WHEEL WILL CONTINUE
Item # E786112
Advertisement
Table of Contents
Related Manuals for DOSKO 337-13H
Summary of Contents for DOSKO 337-13H
- Page 1 Item # E786112 20195 South Diamond Lake Road, Suite 100 • Rogers, MN 55374 • USA (Toll-Free): 866-298-3659 • International: + 1-763-428-0302 • www.dosko.com 20195 South Diamond Lake Road, Suite 100 • Rogers, MN 55374 • USA (Toll-Free): 866-298-3659 • International: + 1-763-428-0302 • www.dosko.com...
- Page 2 Dealer/Agent Name ____________________________ center, or call Dosko direct at 866-298-3659! ALWAYS THINK Dlr/Agt Signature ______________________________ SAFETY Item # E786112 Date _________________________________________ 20195 South Diamond Lake Road, Suite 100 • Rogers, MN 55374 • USA (Toll-Free): 866-298-3659 • International: + 1-763-428-0302 • www.dosko.com...
Need help?
Do you have a question about the 337-13H and is the answer not in the manual?
Questions and answers