Skymen 3800S Instruction Manual

尺寸：130x180mm
材质：书写纸
80g 印刷：单黑

IMPORTANT SAFETY INSTRUCTIONS

WARNING-TO reduce the risk of burns, electrocution, fire or injury to
persons
Do not disassemble
Do not fill the tank
the cleaner except
with
for the authorized
corrosive chemicals.
serviceman.
Do not immerse the
Unplug the cleaner
cleaner in water to
before filling. Do not
reduce the risk of
exceed the MAX mark.
electrocution.
Do not touch the
Do not use this
socket with wet hand
cleaner
to reduce the risk of
sleeping or drowsy.
electrocution.
Never operate this
cleaner if cord plug is
Use this cleaner
damaged.If
properly as perits
working
instruction manual.Do
damaged
not use attachments
not recommended by
damaged cleaner to a
the manufacturer.
service
examination and repair.
Machine must stop 5minutes after continues work for 30minutes.
Any unfirm inlaid article may become loose
articles that easy to be discolored are not recommended for ultrasonic
cleaning.For example:textiles, leather ptoducts, woodware, etc.

PRODUCT INTRODUCTION

DIGITAL DISPLAY SCREEN

TIME
SETTING
ON/OFF
LID STAINLESS STEEL TANK
CONTROL PANEL MAX.MARK
PLASTIC BASKET WATCH STAND
POWER AC100-120V 60Hz
NAME ULTRASONIC CLEANER
SUPPLY AC200-240V 50Hz
MODEL 3800S/T POWER 35W
OVERALL
210x145x140mm FREQUENCY 42KHz
SIZE
TANK SIZE 155x95x52mm TIME SETTING 0-8min.
VOLUME 600ml N.W 0.98kg
IMPORTANT SAFETY INSTRUCTIONS
DANGER-TO reduce the risk of eletrocution
Unplug this cleaner
abrasives or immediately after
using.
Keep the cleaner in
a safe place to avoid
falling into water or
other liquid.
Do not use
when
while bathing.
it is not
properly,
Do not reach of the cleaner that has fallen into water.
into water,
Unplug immediately.
return the
center for
Do not put mobile phone or watch which is not waterproof into the tank
for cleaning.Do not put any spectacles frame or art ware which is made
from shell or hawksbilinto the tank for cleaning.
AVAILABLE FOR
Glasses and Watch Jewelry
WORK
LIGHT
DEGAS
Glasses, Sun glasses, Necklaces, Rings,
Watch chains, Earrings, Bracelets etc.
Wateproof watches etc.
Metal Articles Metal Dishware
Watch parts, Ancient Forks,
coins,Badges, Machine Knives,
HOUSING
nozzles etc. Spoons, etc.
POWER CORD
DIRT ELIMINATION PROCESS THROUGH ULTRASONIC TECHNOLOGY
Cleaning effect will be much better if using the machine together
with proper solvent.
As ultrasonic wave through During the low pressure stage, During the high pressure stage,
the solution in the tank, cause millions of microscopic bubbles the bubbles implode releasing
alternating high and low form and grow. This process
pressures in the solution. is called"CAVITATION".
USER MAINTENAN CE
1
Unplug and empty the cleaner after using.
Do not keep water in the tank for a long time.
Keep the cleaner
away from heat,
and place it in a dry
2
and level surface.
Wipe the tank and housing with dry towel.
Do not wash the cleaner with water to avoid
electric shock.
The cleaner should never 3
be left unattended
whenplugged in.
Keep the cleaner in cool and dry place.

USAGE OF OPTIONAL ACCESSORIES

Do not immerse the
cleaner into water
or other liquid.
PLASTIC BASKET
when small item is to be cleaned, put the item into plastic basket,then put the basket into
the tank. In this way, frictions between the item and the tank can be reduced.
Pay attention:
The plastic basket is only for cleaning small items, because it absoebs about 30% of
ultrasonic energy and reduce the cleaning result, in this case, when using the plastic
basket, please refer to the instruction of ENHANCED CLEANING in this manual.
WATCH STAND
Ultrasonic osmosis is strong. Do not put the ordinary waterproof watch(water proofing
capability less than 30 meters) into the tank and cleaning directly. Do that may cause
watch damage. It is recommended to use the watch stand, immerse the watchband in
water. Similar to plastic to plastic basket, the watch stand will absorbs ultrasonic energy.
When using it, please refer to the ENHANCED CLEANING.
PLEASE READ THIS INTRODUCTION BEFORE USING
KEEP THIS MANUAL FOR REFERENCE

FOUR WAYS OF CLEANING

Daily used
1
GENERAL CLEANING
Use only tap water for general cleaning. The water should immerge
the article to be cleaned, but not exceed"MAX" mark.
Electric shaver heads,
Razor blades, Dentures,
Combs, Toothbrushes etc.
2
ENHANCED CLEANING
Attention:
Stationery
When the article is smeary or extraordinary dirty, add about 10-
15ml of detergent into water to enhance cloeaning result,
ultrasonic effect will be increased.
Pen-heads, Printer-heads, 3
Inkjet cartridges,
Seals etc.
CLEANING BY PARTS
For large article, partly cleaning as shown.
4
EXTENSIVE CLEANING
When the item
use"ENHANCED CLEANING"first, then replace the water and add
about 5-10ml ordinary detergent, restart cleaning about 3 minutes.
enormous amounts of energy.
They work in all directions,
attacking surface and invading
all recesses and openings.
ULTRASONIC CLEANER
3800S/T
INSTRUCTION MANUAL

Application

Eyeglasses shop, jewelry shop, clocks&watch shop, repair shop, hospital, dental
clinics, laboratory, electronic workshop, office and household use.

OPERATION INSTRUCTIONS

1
2
3
4
5
6
needs extensive cleaning or disinfceting,
Open the lid, and fill stainless steel tank with water.
Running without water may damage the cleaner!
Place the article into water(The water should immerse the article to be
cleaned, but not exceed"MAX-" MARK).
Close the lid and plug in (The indicator light will flash).
The digital screen displays the default time 180 seconds after plug in.
Press the "ON/OFF" button, the red indicator light on and the machine
start to work. It will automatically stop after 180 seconds with the red
light off. Then the screen recover to default time.
Press "TIMER"button, 5 setting time can be chosen:180s, 280s, 380s,
480s, 90s. Choose the time according to needs.
Press"DEGAS"button, the machine will work for 9 seconds and stop
for 6 seconds.
Plug off promptly when cleaning is finished. Then take the article out
and pour the water from stainless steel tank and wipe it up.
During cleaning, you can hear the "ZIZI" noise, it means the
ultrasonic cleaner is working.