FLIR Secure FXC101-H Quick Start Manual

HD Wi-Fi Indoor Security Camera
Quick Start Guide
English/Français
What's Included
1 HD Wi-Fi
Security
Camera
2 Mounting
Screws
1 Power
Adapter
Note: Camera configuration, memory card size, and the number of accessories may vary by
model. Please refer to your package for specific details. Your accessories might appear
different from the ones depicted in this guide.

Camera Overview

1.
1
2
3
4
5
2. Camera Lens
3. Speaker
6
7
8
9
10
10
11
fxc003484156
12
13
11
fxc003484156
12
flirsecure.com
© 2016, FLIR Systems, Inc.
FXC21_QSG_EN_FR_R2.indd 1-2
1 Mounting
1 micro
Plate (Pre-
USB Cable
attached)
2 Drywall 3 Cable
Anchors Clips
1 microSD
Quick Start
Card (Pre-
Guide and
installed)
Safety
Information
Status LED
Steady Red: Camera is starting up or
resetting.
Slow-Flashing Red: The router or network
that the camera is connected to is down.
Check your router settings.
Steady Blue: Camera is connected to FLIR
Cloud services.
Fast-Flashing Blue: Firmware upgrade in
progress. DO NOT UNPLUG YOUR CAMERA.
Slow-Flashing Blue: Camera setup in
progress.
Slow-Flashing Blue and Red: Camera is ready
for setup.
LED Off: Camera is in privacy / covert mode, or
is turned off.
4. Microphone
5. Night Vision LED
6. Micro USB Power Port
7. Reset Button
8. microSD Card Memory Slot
9. Micro USB Power Cable Holder: Secure
the USB power cable with this clip.
10. Camera Base
10. Camera Base
11. QR Code
12. Device ID
13. Mounting Plate
FXC21_QSG_EN_FR_R2
HD Wi-Fi Indoor Security Camera
For FAQs, setup guides, and support videos visit
flirsecure.com/support
Setup Instructions
Step One
Initial Setup
1. Plug in your camera. Camera turns on automatically when the power
adapter is connected.
2. Remove the protective film on the lens.
3. Download the FLIR Secure™ app to your mobile device, then launch the
app.
FLIR Secure™
Tap SIGN UP and enter your email address and password to create a new
4.
FLIR Cloud™ account.
Note: If you already have an existing FLIR Cloud™ account, enter your email address and password
and tap LOG IN.
Step Two
Setting Up Your Camera
Note: If Bluetooth (BLE) is not supported on your mobile device, follow the setup instructions in the
"Wi-Fi Setup - For Android Users Only" section.
1. Make sure your mobile device's Bluetooth is turned on.
Note: Refer to your mobile device's user guide for instructions on turning on Bluetooth.
2. Tap ADD DEVICE, then tap Camera.
Home
Add your first Device
ADD DEVICE
If this is not the first device on your account, tap
3. Follow the on-screen instructions to complete setup.
Wi-Fi Setup - For Android Users Only
IF Bluetooth (BLE) is not available on your mobile device, follow these
setup instructions:
1. Tap ADD DEVICE, then tap Camera.
If this is not the first device on your account, tap
2. Scan the QR code as shown below.
Add Camera
Scan the QR code using your mobile device
Center the QR code inside the frame
Make sure that your camera is turned on
and has a working internet connection
3. Follow the on-screen instructions to complete setup.
Note: If you cannot scan the camera's QR code, tap
the "Camera Overview" section for Device ID location.
Note: If your mobile device has bluetooth turned on but your camera's device ID does not show up on
the screen, tap "CAN'T FIND YOUR DEVICE?". Scan the QR code and follow the on-screen
instructions to complete setup.
Log In
Welcome to FLIR Secure
Email
Password
LOG IN
SIGN UP
FORGOT PASSWORD?
Cancel New Device
Which device would you like to add?
Camera
Security System
and then tap Camera.
and then tap Camera.
fxc003484156
to enter the camera's Device ID manually. See
8/18/2016 5:02:45 PM