Fonts For Faxing; Resources For Fax Programmers - Diamond SupraExpress 56e Manual

to use. To determine which fax standard is supported by your modem, issue the ATi10 command
from your terminal software. Fax Standard Class 1 is Feature #101.
If you need help installing your fax software, refer to your fax software manual.
F
ONTS FOR
To ensure the best quality fax output, it is important to use both screen and printer fonts, and, if
applicable, to also use Adobe Type Manager (ATM)
a font that is built into your printer for which you have a Screen font, but not a Printer font. The
type looks fine on your screen, but will be faxed in block letters because it uses the Screen font to
create each character. The solution is to use a font with both Printer and Screen fonts, or to obtain
the printer font you need.
R
ESOURCES FOR
Available fax software should provide all the fax functions most users need. However, if you are an
advanced programmer and want to write fax software, you can obtain information about fax
commands by searching International Telecommunications Union (ITU-T) and/or
Telecommunications Industry Association (TIA) web sites, or from the following source.
ITU and TIA publications can be purchased from:
The PC-specific fax driver and utilities (for both DOS and Windows) are available for license by
faxing a request to Developer Relations at Thought Communications, Inc. The fax number is:
(408) 452-1011. Request the Fax Application Programming Interface (FAPI).
40
F
AXING
Global Engineering Documents
2805 McGraw Ave.
Irvine, CA 92714
The telephone number is (714) 261-1455. Additional phone numbers are: 1-(800) 624-3974 in
the U.S. and 1 (800) 854-7179 outside the U.S.
®
or TrueType
F P
AX ROGRAMMERS
®
. A common problem is selecting