Trade Show 4G Mega Internet Kit Quick Start Up Manual

For the best coverage, place the kit on a flat stable surface (such

as a 3' tall table) near the center of your space, away from

obstructions, as close to your WiFi users as possible. Unlatch and

securely store the front and back covers of the kit's case.

Locate the power cord on the back. Plug the cord into

any standard 110V/10A 3‐prong wall electric outlet.

Press the black ON/OFF button (see picture).

The Power Indicator LED should turn solid blue.

The WiFi Indicator LED should occasionally flicker blue.

Wait 1 minute.

For Wireless (WiFi) Connections:

 Using your device's wireless network connection program, find

and connect to the network name listed on the label.

 Type in the Password listed on the label (WPA2 encryption).

If successful, you should now be online.

For Wired Ethernet Connections:

 Plug in your cat5 Ethernet cable(s) into ports 5 through 24 on

the switch. The router will recognize each hard‐wired device

and issue it a dynamic IP address (DHCP).

4G Mega Internet Kit ‐ Quick Start Guide

Ethernet

Ports

WAN

Front

ON/OFF Button

Power

WiFi Indicator LED

Indicator

LED

MBR1400‐123

Table of Contents

Need help?

Do you have a question about the 4G Mega Internet Kit and is the answer not in the manual?

Page 1 4G Mega Internet Kit ‐ Quick Start Guide For the best coverage, place the kit on a flat stable surface (such as a 3’ tall table) near the center of your space, away from obstructions, as close to your WiFi users as possible. Unlatch and securely store the front and back covers of the kit’s case. Front Locate the power cord on the back. Plug the cord into any standard 110V/10A 3‐prong wall electric outlet. Press the black ON/OFF button (see picture). The Power Indicator LED should turn solid blue. The WiFi Indicator LED should occasionally flicker blue. Wait 1 minute. ON/OFF Button ...
Page 2: Troubleshooting
Troubleshooting  If your WiFi network does not show up, refresh the list of networks on your device. If this doesn’t work, press the ON/OFF button to shut down your kit, then press the button again to power it up and wait 1 minute.  If you are still unable to see the router's wireless (WiFi) network name in your list of WiFi networks, please contact tech support at (866) 385‐1504 x3. ...