Danfoss RET B-LS Operating Instructions

man
SYS
M A N Systems Inc.
© 2017 M A N Systems Inc. All rights reserved.
CW-30 SERIES THERMOSTAT
MODEL DANFOSS RET B – LS FOR EUROPEAN MARKET
Operating Instructions
Viewing Room Temperature and Unit Operation Status: The LCD will dis-
/
play the actual room temperature during normal operation. If the display is
blank, replace the batteries. Further, a snowflake symbol will appear on the
display when there is a demand for cooling (unit should operate when this
symbol is illuminated).
Setting the temperature: Turn setting dial. The display will flash indicat-
/
ing the setpoint temperature selected. After a short period, the display stops
flashing and shows actual room temperature.
Low Battery Indication and Changing Batteries: A battery symbol will flash
/
in the display when batteries require replacement. Batteries should be re-
placed within 15 days, after which the thermostat will turn off the unit. When
this happens, "OF" will be displayed. To avoid having this happen, replace the
batteries every 18 months. Thermostat takes 2xAA/MN1500 Alkaline Batter-
ies. Ensure that unit is unplugged or that electric circuit to unit is turned off,
prior to replacing batteries.
AUTO/OFF Switch: When the switch is set in the "O" position, thermostat will
/
turn unit off and "OF" is displayed.
http://www.mansystems.net | 1-800-533-1712 | info@mansystems.net