Summary of Contents for RHYNO Windshield Cutter RWC-40
- Page 1 RHYNO 18V 1/2” Power Drill - OPERATOR’S MANUAL - USA Catalog No: RWC-40 TO REDUCE THE RISK OF INJURY, USERS MUST READ AND UNDERSTAND OPERATOR’S MANUAL. Rev A 4/1/2017...
- Page 2 Definitions: Safety Guidelines The definitions below describe the level of severity for each signal word. Please read the manual and pay attention to these symbols. DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
- Page 3 Torque Gear Adjustment Collar Shifter Forward- Keyless Chuck Reverse Variable Speed Button Trigger Switch Work Light Battery Release Button Belt Hook...
-
Page 4: General Power Tool Safety
Part Name Qty. Part Name Qty. Housing Bracket Rotor Reversing Lever Switch Housing Name Tag Gear Box Screw(+) Left Hand Screw Belt Hook Keyless Chuck Star Screw Battery Pack Shift Lever Charger Screw(+) a) Power tool plugs must match the GENERAL POWER TOOL SAFETY outlet. - Page 5 3) PERSONAL SAFETY The correct power tool will do the job a) Stay alert, watch what you are doing better and safer at the rate for which it common sense when was designed. operating a power tool. Do not use a b) Do not use the power tool if the switch power tool while you are tired or under does not turn on and off.
- Page 6 battery pack may create a risk of fire • Use clamps or other practical way to when used with another battery pack. secure and support the workpiece to a b) Use power tools only with specifically stable platform. Holding the work by designated battery packs.
-
Page 7: Important Safety Instructions For All Battery Packs
WARNING! Some dust created by CAUTION: When not in use, place tool power sanding, sawing, grinding, drilling, on its side on a stable surface where it will and other construction activities contains not cause a tripping or falling hazard. Some chemicals known to the State of California tools with large battery packs will stand to cause cancer, birth defects or other... - Page 8 stepped on). Damaged battery packs • Charge the battery packs only in should be returned to the service center for designated RHYNO chargers. recycling. • DO NOT splash or immerse in water or other liquids. Transportation • Do not store or use the tool and battery pack in locations where temperatures WARNING! Fire hazard.
-
Page 9: Important Safety Instructions For All Battery Chargers
the warnings and instructions may result in electric shock, fire and/or serious injury. • DO NOT attempt to charge the battery pack with any charges other than the ones in this manual. The charger and battery pack are specifically designed to work together. -
Page 10: Charging A Battery Pack
Minimum Gage for Cord Sets WARNING! Burn hazard. Do not Volts Total Length of Cord in Feet (meters) submerge the batter pack in any liquid or allow any liquid to enter the battery pack. 25 (7.6) 50 (15.2) 100 (30.5) 150 (45.7) 120V Never attempt to open the battery pack for 220V... - Page 11 c. You can “top off” each battery pack at Clean out dust and debris from charger any time or at any level of battery vents and electrical contacts by blowing charge as needed. with compressed air. Use only mild soap d.
-
Page 12: Assembly And Adjustments
This drill is a professional power tool. DO ASSEMBLY AND ADJUSTMENTS NOT let children come into contact with the tool. Supervision is required when WARNING! To reduce the risk of inexperienced operators use this tool. serious personal injury, turn unit off and remove the battery pack before making Variable Speed Trigger Switch any adjustments or removing /installing... -
Page 13: Work Light
NOTE: The first time the tool is run after Two-Speed Gearing changing the direction of rotation, you may The two-speed feature of your tool allows hear a click on start up. This is normal and you to shift gears for greater versatility. To does not indicate a problem. - Page 14 Keyless Chuck WARNING! Do not attempt to tighten drill bits (or any other accessory) by gripping the front part of the chuck and turning the tool on. Damage to the chuck and personal injury may result. Always lock off trigger switch and disconnect tool from power source when changing accessories.
-
Page 15: Operation
IMPORTANT: When attaching or replacing to avoid damage to the workpiece or the belt hook or bit clip, use only the screw fastener. that is provided. Be sure to securely tighten NOTE: When torque is achieved in the screw. screwdriving mode, unit will... -
Page 16: Maintenance
6) To minimize stalling or breaking through been tested with this product, use of such accessories with this tool could be the material, reduce pressure on drill hazardous. To reduce the risk of injury, and ease the bit through the last only RHYNO recommended accessories fractional part of the hole. -
Page 17: Register Online
Register Online Register online www.rhyno.com/warranty-registration/ Thank you for your purchase. Register your product now for: NOTE: Battery warranty voided if the battery pack is tampered with in any • WARRANTY SERVICE: Registering your way. RHYNO and We Cut The Glass, LLC product will help you obtain more efficient are not responsible for any injury caused warranty service in case there is a problem... -
Page 18: Limited Warranty
LIMITED WARRANTY Every RHYNO tool including battery and battery charger, is warranted to the original purchaser only to be free from defects in material and workmanship. Subject to certain exceptions, We Cut The Glass, LLC will repair or replace any part which after examination, is determined by We Cut The Glass, LLC to be defective in material or workmanship for a period of two (2) years after the date of purchase unless otherwise noted.
Need help?
Do you have a question about the RWC-40 and is the answer not in the manual?
Questions and answers