Maintenance; Cleaning And Maintenance - Igloo ARBF4 Instruction Manual

REFRIGERATION LTD
A7 digital input alarm delay
A8 enable alarm "Ed" (end defrost by timeout)
Ac set point dirty condenser alarm
AE dirty condenser alarm differential temperature
Acd dirty condenser alarm delay
F0 enable evaporator fan control
F1 evaporator fan control set point
F2 stop evaporator fan if compressor off
F3 evaporator fan status during defrost
Fd post-dripping time
H0 serial address
H1 AUX output configuration
H2 enable keypad
H4 disable buzzer
H5 ID code (read-only)
EZY restore the Default settings

5. MAINTENANCE

Do not use steel wool, abrasive cleaners, bleach or cleaners containing chlorine or sodium to clean the unit.
•
• Do not use a pressure washer or water-jet to clean the unit.
• The unit should be cleaned right after unpacking and before turning it on.
• The unit should be cleaned with warm water and a mild soap.
• Make sure to cover the fan motor to prevent moisture damage.
Door gaskets, shelves and supports should be cleaned on a regular basis.
•
• Fan blades and guards should be cleaned with a soft moist cloth.

5.1 Cleaning and maintenance

• All maintenance services need to be performed after disconnecting the
equipment from power supply!
• Protect electrical components against any damage or water spillage.
• Do not use water stream to clean the equipment, only a moist cloth.
• Do not use any sharp objects to remove dirt!
It is recommended to make a break in the operation once a month in order to clean the interior, naturally defrost
the evaporator and clean the condenser.
Do not use mechanical agents to quicken the defrosting process!
12 www.igloorefrigeration.com Ice Cream/ Gelato
|
0 min
0 -
60 °C -50
3.0 °C 0.1
0 min
1 -
-2.0 °C -50
0 -
1 -
1 min
1 -
1 -
1 -
0
-1 -
0 0
0 199
0 1
250
20
0 250
0 1
130
0 1
0 1
0 15
0 207
0 2
0 2
0 1
1 +199
0 1