Fzone Music Technology Co., Ltd FT-002C User Manual

Fzone Music Technology Co.,Ltd
.
www fzonetechnology com
Chromatic Tuner
FT-002C FT-002C
Thank you for using FZONE tuner! The frequency range detected by the
FT-002C is optimized for all instruments by Chromatic Tuner sense the
vibrations of the instrument it is attached to.

ATTACHING THE TUNER TO YOUR INSTRUMENT

*Use the clamp to attach the tuner to your instrument. Take care to avoid
damaging the finish of your instruments. Do not attach the tuner to your
instrument if any of the rubber pads are broken or missing,
*For guitars, attach the clamp to the headstock (placing the body of the
tuner either in front of or behind the headstock). For other instruments,
find the location that allows best pick up of sound while allowing you to
view the display easily.
*After attaching the tuner to your instrument adjust the arm that connects
the tuner to the clamp for optimum viewing of the tuner display.
APPEARANCE AND SKETCH
FT-002C
LCD
Power

POWER UP

*Once you have attached the tuner to your instrument or music stand,
turn it on by pressing the power switch on the face of the tuner.
*The tuner defaults to the tuning reference of A-440Hz. To set to another
Tuning reference, push the A4 button on the front of the tuner and
press the button again to choose a new tuning reference The pitch
reference can be set anywhere from
switch off, the tuner will record A4 which u choose automatically Take
off the battery to reset the tuner to A-440Hz.
：9 6 * 1 72
：8 0 g
User's Manual
.
,
Battery
cover
Clip
" "
430 —
Hz 450Hz. To press the power
MM
.
Note accuracy
indication
A4
.
.