WIRELESS MOUSE AND KEYBOARD QUICK START GUIDE
Wireless mouse
1.
Turn the mouse over and remove the battery cover.
2.
Remove the USB dongle from its holder in the battery
compartment of the mouse.
3.
Plug it into a free USB-A port on the bezel connector
panel of the display. You may be asked to go online to
find the necessary drivers. If you are warned that the
drivers have not been tested for compatibility, tap
Continue installation to finish.
4.
Insert two (2) AAA batteries (not included) into the
mouse by aligning the + and – end of the batteries as
indicated and sliding them in place.
5.
Replace the cover and switch the mouse ON using the
slide switch next to the battery bay.
6.
If the mouse is not auto-detected, press the CONNECT
button on the bottom of the mouse and hold it for one
second to allow the mouse to bind with the dongle.
Wireless keyboard
1.
Turn the keyboard over and open the battery cover.
2.
Insert two (2) AAA batteries (not included) into the keyboard, by aligning the + and – ends of the
batteries and sliding them in place.
3.
Replace the cover.
4.
If the keyboard is not auto-detected, press the CONNECT button on the top of the keyboard and hold it
for one second to allow the keyboard to bind with the dongle.
009-1684-00
HW-MOUSEKEYBD-2 Quick Start Guide
Need help?
Do you have a question about the HW-MOUSEKEYBD-2 and is the answer not in the manual?
Questions and answers