Advertisement
INTERFACING WITH THE XTR2 CONTROL
continued
2. Click the diagnostic menu item from the Master Settings
menu in the Field Programmer application. Diagnostic data,
including a graph displaying daily average water usage from
the previous four weeks, is displayed in the application
window.
Figure 12 Diagnostic Data Display
NOTE: Diagnostic data displayed in the Field Programmer
application is read only and is cleared upon exit of the
application.
Saving and Loading Programming Configurations
Master Settings Programming configurations can be saved
to a file on your PC for storage and easy retrieval. Common
configurations can then be quickly and easily applied to control
valves before being sent out to the field for installation.
To save a programming configuration:
1. Click the
icon in the Field Programmer application. The
Save window appears.
2. Type a name into the File Name field and click the Save
button to save the file. If necessary, specify the location on
your PC where you would like to save the file.
3. Click the Save button to save the file.
Fleck para las garantías de los productos visite:
WATER QUALITY SYSTEMS
5730 NORTH GLEN PARK ROAD, MILWAUKEE, WI 53209
P: 262.238.4400 | WATERPURIFICATION.PENTAIR.COM | CUSTOMER CARE: 800.279.9404 | tech-support
For a detailed list of where Pentair trademarks are registered, please visit waterpurification.pentair.com/brands.
§
Pentair trademarks and logos are owned by Pentair plc or its affiliates. Third party registered and unregistered
trademarks and logos are the property of their respective owners.
44062 REV B MY16 © 2016 Pentair Residential Filtration, LLC All Rights Reserved.
For Fleck Product Warranties visit:
Pour Fleck garanties produit visitez le site :
4. A success message appears when the file has been
successfully saved. Click the OK button to clear the
message.
Figure 13 Save Successful Message
To load a saved configuration file:
1. Click the
icon in the Field Programmer application. The
Open window appears.
2. Navigate to the location on your PC where your saved
configuration file is stored. Select the file and click the Open
button. The saved configuration is loaded into the Field
Programmer application.
3. Upload the saved configuration to the control by following
the procedure titled "Uploading Programmed Settings to the
XTR2 Control" above.
Disconnecting from the Control
When all programming is complete, the XTR2 control will
display a message stating that it is OK to disconnect from the
PC.
Figure 14 Programming Complete
NOTE: Do not press
or disconnect the control until the
above message is displayed on the XTR2 control.
Press the
button on the XTR2 control to exit the USB screen
and return to the Master Settings screen. Press the settings
review button to review the settings that were uploaded to the
control or press the
button to return to the Home screen. The
control can now resume normal operation.
}
waterpurification.pentair.com
pentair.com
@
Advertisement
