Falconeyes FE-MR18 Instruction Manual

D) Technical Specifications

Guide No.
Illumination Angle 2×[Height:60 ×Width:45] (Angle adjustable)
Recycling Time ≤ 3 seconds (Full power); ≤ 1.5 seconds (Half power M/2)
Flash Duration
No. of flash approx. 300 times (New alkaline batteries, full power)
Color Temperature
Shooting Distance
Modeling Lamp Turn off automatic off after 25 seconds
Triggering
Maximum size of lens
Power Source
Lamp Head (L x W x D): 150cm x 130cm x 25cm
Dimensions Control Panel (L x W x D): 65cm x 60cm x 92cm
Weight

E) Attention:

1．Turn off the flash when not in use. Remove the batteries if the flash unit is not
to be used for a period of time.
2．Avoid any scratch or worn on the lamp's protector, so as to ensure the light
effect and guide no. would not be affected.
3．To ensure the guide no. quality, only press the shutter when the ready signal -
charge indicator lights up.
4．The flash should be stored in a cool, dry and well ventilated place. Before
shooting, please trigger the flash several times in order to restore the energy
storage capacitor to the best status.
5．Please do not clean the flash with petrol, alcohol or organic detergent.。
6．Please DO NOT open or repair the unit yourself. If there is any defect, please
contact the experienced technician.
3
5.6m (ISO 100/21° , Full Power)
1/2000 seconds
~5600K (Daylight)
20-100cm
Low Voltage Triggering
Φ77mm
4 x 1.5V AA batteries
264g ( Batteries excluded)
FM1109_FE-MR18_eng
Thank you for purchasing FalconEyes' products.
For further details of our related products, please contact your
local distributor or visit our webpage at www.falconeyes.com.hk
Thank you.
Please read this manual carefully before using this product.
FE-MR18 Ring Flash
Instruction Manual
Adepter ring size:
52/55/58/62/67/72mm