SoundCup-S
ACCENTS
User Manual
Elegant Bluetooth Speaker
with Fabric Covering
• Sound track: dual track
ACCESSORIES
• Signal to noise ratio S / N: ≥75dB
1x SoundCup-S Bluetooth Speaker
• Frequency Range: 180Hz-20KHz
• Distortion THD: ≤ 1%
1x User Manual
1x USB Charging Cable
• Speaker unit: outer diameter 45mm, inner magnet, 4 , 5W x 2
1x AUX 3.5mm Audio Cable
Parameters of power
HIGHLIGHTS
• Rated voltage: 3.7V DC
SoundCup-S is a compact Bluetooth speaker that can be wirelessly connected
• Battery: built-in lithium battery, 3.7V/2000mAh
to Bluetooth devices such as smartphones, tablets and computers to playback
• Charging Voltage/Current: 5V ± 0.25V / 0.8A
any music collection stored on them. Thanks to the powerful battery and
• Charging time: 4~5 hours
passive radiator, the system delivers typical bass sound.Di erent from other
mains supply, it can support about 6 to 7 hours' play time. The process control
• Playing time: 6~7 hours
helps you get rid of complicated connections and wiring distance constraints.
Therefore, users can enjoy high-quality music anytime and anywhere.
BLUETOOTH CONNECTION
Power ON/OFF
Long press
to power on / o .
Turn the speaker on by pressing the power for several seconds, then the blue
Turn clockwise to turn up the Volume and
led ashes quickly. The speakernow has entered the Bluetooth pairing mode.
Volume – or +
counterclockwise to turn the Volume down.
CONNECT TO MOBILE PHONES/TABLET PCs/COMPUTERS
In the Bluetooth mode, slide to the right to get
1. Activate your phone's Bluetooth.
2. Go to your phone's Bluetooth settings, scan for newBluetooth devices.
Next/Previous
to the next track and to the left to get to
3. Upon device found (SoundCup-S), click the device nameand pair with it.
the previous track
.
!
4. If your phone ask for pairing code , please enter "0000" and con rm it.
Play/Pause
When playing music, press
short to Pause/Play.
5. After successful pairing, the speaker will make a promptsound and the LED
light turns blue.
When a call comes in, press
short to pick up
Answering a call
Note:
the call and press it again to hang up.
Pairing time is varied with di erent mobile phones. It onlyneeds pairing at
05
5
01
ACCESSORIES
1x SoundCup-S Bluetooth Speaker
Accents Bluetooth Speaker
1 x Accents Bluetooth Speaker
1x User Manual
1 x USB Charging Cable
1x USB Charging Cable
1 x AUX 3.5mm Audio Cable
1x AUX 3.5mm Audio Cable
HIGHLIGHTS
SoundCup-S is a compact Bluetooth speaker that can be wirelessly connected
The Rokono ACCENTS is a compact Bluetooth speaker that can be wirelessly
The ACCENTS
to Bluetooth devices such as smartphones, tablets and computers to playback
connected to Bluetooth devices such as smartphones, tablets and computers to
any music collection stored on them. Thanks to the powerful battery and
playback any music collection stored on them. Thanks to the dual-5W speakers
passive radiator, the system delivers typical bass sound.Di erent from other
and passive bass radiator, the Accents speaker creates room- lling sound.
mains supply, it can support about 6 to 7 hours' play time. The process control
The speaker's battery can provide up to 8 hours of audio playback and can
helps you get rid of complicated connections and wiring distance constraints.
be recharged using the supplied USB Charging Cable.
Therefore, users can enjoy high-quality music anytime and anywhere.
BLUETOOTH CONNECTION
Turn the speaker on by pressing the power button for several seconds, the blue
Turn the speaker on by pressing the power for several seconds, then the blue
led ashes quickly. The speakernow has entered the Bluetooth pairing mode.
LED light will ash quickly. The speaker has now entered Bluetooth pairing mode.
CONNECT TO MOBILE PHONES/TABLET PCs/COMPUTERS
1. Activate your devices Bluetooth.
1. Activate your phone's Bluetooth.
2. Go to your devices Bluetooth settings and search for new Bluetooth devices.
2. Go to your phone's Bluetooth settings, scan for newBluetooth devices.
3. Upon device found (SoundCup-S), click the device nameand pair with it.
3. Select the device named 'Rokono Accents' to pair with it.
(Rokono ACCENTS)
!
4. If your phone ask for pairing code , please enter "0000" and con rm it.
4. If your phone asks for a pairing code, enter "0000".
5. After successful pairing, the speaker will make a promptsound and the LED
5. After successful pairing, the speaker will make a con rmation sound and the
light turns blue.
LED light turns blue.
Note:
Pairing time is varied with di erent mobile phones. It onlyneeds pairing at
The Accents speaker only
01
1
When a call comes in, press
twice "quickly" to
the rst time and it will auto connect the devices which have already been
Refuse a call
paired before (The speaker only can remember the last 8 paired devices'
refuse the call.
names)
AUX AUDIO-IN CONNECTOR
Note:
The speaker also features 1x AUX audio in port, simply connect the speaker
1. Under Bluetooth mode when the 3.5mm audio plug is inserted, the
with your non-Bluetooth mobile phone/MP3 player/PC/laptop with the
speaker will switch to line in status automatically;
3.5mm jack audio cable. The green indicator light will be on, and then you
2. Please turn o the speaker if you don't use it to prevent power drain.
can play music via wired connection.
LOW POWER INDICATION
The speaker will indicate a beep sound to remind you to charge if battery is
WORKING TEMPERATURE
STORAGE CONDITION
low (battery only left 10%).Users need to charge the speaker timely.
Temperature: 0º C ~ 40º C
Temperature: -30º C ~ 60º C
CHARGING
Humidity: 0% ~ 85% RH
Humidity: 0% ~ 90% RH
Connect the micro USB charging cable to a computer or USB charger, red Led
indication for charging status. Red LED goes o upon charging nished. (4~5
hours for charging)
NFC Function
There is a built-in NFC chip in the speaker. Activate the NFC function on the
phone and put the phone close onto the NFC position of the speaker. Then,
do according to the phone instructions to fast connect the phone with the
Bluetooth speaker via NFC function.
SPECIFICATIONS
Speaker Interfaces
Audio input connector: 3.5mm
AUX cable: support aux external audio input.
Charging interface: Micro USB; Input 5V
06
6
02
needs to be paired manually the rst time. It will then auto connect devices
the rst time and it will auto connect the devices which have already been
that have been paired before, the speaker can remember that last 8 paired
paired before (The speaker only can remember the last 8 paired devices'
devices.
names)
AUX AUDIO-IN CONNECTOR
The speaker also features 1x AUX audio in port, simply connect the speaker
with your non-Bluetooth mobile phone/MP3 player/PC/laptop with the
3.5mm jack audio cable. The green indicator light will be on, and then you
can play music via wired connection.
LOW POWER INDICATION
The speaker will indicate a beep sound to remind you to charge if battery is
When the battery goes below 10% charge the speaker will make a beep sound
low (battery only left 10%).Users need to charge the speaker timely.
to remind you to charge the Accents speaker.
CHARGING
Connect the micro USB charging cable to a computer or USB charger, red Led
LED
indication for charging status. Red LED goes o upon charging nished. (4~5
hours for charging)
NFC Function
There is a built-in NFC chip in the speaker. Activate the NFC function on the
There is a built-in NFC chip in the speaker. Activate the NFC function on the
phone and put the phone close onto the NFC position of the speaker. Then,
phone and put the phone close to the NFC logo (bottom of the speaker).
do according to the phone instructions to fast connect the phone with the
Then follow instructions on your phone to complete connection.
Bluetooth speaker via NFC function.
SPECIFICATIONS
Speaker Interfaces
Audio input connector: 3.5mm
AUX cable: support aux external audio input.
Charging interface: Micro USB; Input 5V
02
2
TROUBLE SHOOTINGS
Dimensions and Basic Parameters
1. My mobile phone can't nd any new Bluetooth devices?
Length: 174.3mm ± 0.2mm
a) Make sure the Bluetooth speaker has entered pairing mode;
Width: 72mm ± 0.2mm
b) Ensure the speaker is within the e ective working range;
Height: 72mm ± 0.2mm
2. Bluetooth devices can't pair up
Material: ABS + Fabric
a) Make sure your mobile phone allows new connection, did not reach the
a) Make sure the Bluetooth speaker has entered pairing mode.
Weight: 510g ± 5g
maximum allowed connection number, please ref to your mobile's user
b) Make sure your mobile phone is not paired to another Bluetooth device.
manual;
c) Make sure you click the 'Rokono Accents' in the settings.
b) Make sure you click the right Bluetooth pairing name.
Front
Back
Left
Right
3. My mini speaker does not play music / answer call when it connected
to a Bluetooth mobile phone?
a) Make sure your Bluetooth mobile phone supports A2DPand HSF(hands-
free) pro le;
b) Ensure your Bluetooth cell phone is within e ective working range.
4. When paired with my computer, windows ask for new driver? Can you
supply?
a) We can't supply. The Bluetooth A2DP/HSF drivers may require playing
stereo sound via Bluetooth Connection. But the driver is actually needed for
the Bluetooth module on your PC, instead of the speaker. Di erent Bluetooth
module may require di erent drivers. Please contact your PC or Bluetooth
module's manufacturer for driver update.
Top
Bottom
5. Why can't I remotely control the pause, play, previous song and skip
track functions with the speaker when playing music?
a) When you are using 3.5mm AUX audio in connection, you can't pause,
change volume or skip tracks with the buttons on the speaker;
07
7
03
Dimensions and Basic Parameters
Length: 174.3mm ± 0.2mm
Width: 72mm ± 0.2mm
Height: 72mm ± 0.2mm
Material: ABS + Fabric
Weight: 510g ± 5g
Front
Back
Left
Right
Top
Bottom
03
3
b) This feature needs the Bluetooth devices paired with the speaker to
FUNCTION ANALYSIS
support AVRCP (Audio/Video Remote Control Pro le). Please make sure
your cell phone or other Bluetooth device supports AVRCP.
SAFETY NOTICES
Read the following recommendations before using the Bluetooth
speaker.
a) Keep it dry and don't take it to damp places to avoid the product's
internal circuit being a ected.
Slide Next/Previous
b) Keep the product away from direct sunlight or hot places. High
temperatures will shorten the life of electronic devices, destroy the battery
or distort certain plastic parts.
c) Don't expose the product to extremely cold area. It may damage the
internal circuit board.
d) Don't try to disassemble the product as it may get damaged if you are
Power ON/OFF
not professional. The internal circuit might get damaged.
Play/Pause &
Calls Handsfree
f ) Don't use intensive chemical products or detergent to clean the product.
g) Don't scratch the surface with sharp tips.
Rotary Volume +/-
ELECTRICAL SPECIFICATIONS
• Bluetooth Compatibility: It is compatible with Bluetooth 4.1Class II and
supports A2DP V1.2, AVRCP V1.4 pro les agreement.
• Transmission distance: up to 10 m
08
8
04
FUNCTION ANALYSIS
Slide Next/Previous
Power ON/OFF
Play/Pause &
Calls Handsfree
Rotary Volume +/-
ELECTRICAL SPECIFICATIONS
• Bluetooth Compatibility: It is compatible with Bluetooth 4.1Class II and
supports A2DP V1.2, AVRCP V1.4 pro les agreement.
• Transmission distance: up to 10 m
04
4
SoundCup-S
www.rokono.com
www.trendwoo.com
User Manual
Elegant Bluetooth Speaker
/RokonoAudio
with Fabric Covering
email: support@rokono.com
support@trendwoo.com
Designed by Trendwoo in Los Angeles.
MADE IN CHINA
Need help?
Do you have a question about the ACCENTS and is the answer not in the manual?
Questions and answers