16
Operating
How to use the
Google Assistant
Google Assistant LED status
3
LED
,
Note
The Google Assistant LED status may be
changed without notice.
Status
Description
Ready to listen
All four LEDs
to your voice
are on.
command.
Responds to
All four LEDs
your voice
blink.
command.
Microphone
Voice
is off and the
recognition is
solid amber
disable
LED will be on.
Talk to the Google Assistant
You can use a variety of voice commands to control
this speaker with the Google Assistant. Try to say
a voice command to the speaker. The speaker will
activate the Google assistant and perform your voice
command.
Hey, Google.
Set the alarm at 4 PM.
There, your alarm
is set for 4 PM.
1. Turn on the speaker and connect Wi-Fi. Follow
the "Setting up the Speaker". (page 9-13)
2. Say "Hey Google".
Or long press
for 2 seconds on top of the
speaker.
Then the speaker is activated and ready to receive
your voice commands.
Hey,
Or
Google.
3. Just say the thing you want to do. Then the
speaker recognizes and performs your voice
command.
4. After a few seconds, the Google Assistant will
respond to your command.
,
Note
Each time you use voice recognition, say "Hey,
Google" or tap and long press the
.