Advertisement
Quick Links
Advertisement
Summary of Contents for IAP SF-1000
- Page 1 SF-1000 workbench - welding table User’s Manual www.IAP-AirProducts.com...
-
Page 2: Ec Declaration Of Conformity
SF-1000 workbench - 2 - About this document Graphic symbols Equipment arrival Product application Construction Technical data and dimension Arm installation Filter change Compressed air cleaning system 1. Manual cartridge cleaning 2. Motor control with compressed air cleaning timer 3. Manual or automatic fan control, manual cartridge cleaning... - Page 3 About this document This instruction manual contains SF-1000 workbench - welding table use and maintenance information. SF-1000 user should become acquainted with contents of this publication to learn about unit construction, principles of operation and means of its safe use.
-
Page 4: Product Application
Product application SF-1000 welding table can be operated without restriction in the technical areas intended for permanent human habitation. SF-1000 is designed for extraction and purification of air from the dry dust (with particular emphasis on the processes of welding, grinding, polishing, pouring, dispensing, grinding, cutting metals and plastics). -
Page 5: Arm Installation
SF-1000 workbench - 5 - Technical data and dimension 29.09” 9.06” 10.79” 45.28” Air volume [cfm] - 590 Noise rating [dB(A)] - 73 H (for 1620p) [ft] - 12.96 Ø6.1” R (for 1620p) [ft] - 9.19 Power supply [V]/[Hz] - 1x120/60 Motor power [HP] - 1.5... - Page 6 SF-1000 workbench - 6 - Filter change WARNING! Stop the filter unit and disconnect it from Due to the extremely harmful to the health fine dust, power supply before filter change operation. located inside the filter unit and on filter cartridges, all work associated with filter exchange should be done using respiratory protective equipment.
- Page 7 SF-1000 workbench - 7 - Compressed air cleaning system 1. Manual cartridge cleaning • Cartridge cleaning is activated with compressed air release button (see the drawing). A pulse of compressed air cleans the cartridges blowing off dust cake built up between cartridge pleats.
- Page 8 SF-1000 workbench - 8 - 2. Motor control with compressed air cleaning timer • Timer is mounted on compressed air cleaning cutout. • For timer control operation detail read C-4 compressed air cleaning timer. access is possible through inspection hole...
- Page 9 SF-1000 workbench - 9 - 3. Manual or automatic fan control, manual cartridge cleaning • Cleaning the pulse starts by pressing the cleaning system. Pulse of compressed air cleans the filter cartridges (before the next pressing, wait approx. 10s., Until the tank is filled with compressed air).
- Page 10 SF-1000 workbench - 10 - Compressed air supply connection SUPPLY INPUT Technical Specifications Power supply - 24Vac ... 230Vac – 50/60Hz (on demand also 24 … 230 Vac/ Max. power - 0.8A Absorbed power - 2mA (at rest) OPERATION time - 0-1 sec / 0-20 sec...
-
Page 11: Troubleshooting
SF-1000 workbench - 11 - Use and maintenance Daily: Monthly: Yearly: • overall control for any leakage, • inspection of compressed air and • recommended replacement of including the state of door pneumatic components carbon filter and cartridges • seal and flexible suction pipes or •... - Page 12 SF-1000 workbench 888-372-0050 x4 Sales@IAP-AirProducts.com www.IAP-AirProducts.com...