1. Manuals
  2. Brands
  3. nekos Manuals
  4. Locks
  5. K-LOCK
  6. Instruction manual

nekos K-LOCK Instruction Manual

Electromechanical lock
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Enlarged version
K-LOCK
INSTRUCTION MANUAL
ELECTROMECHANICAL LOCK
EN
Force 600N – Strokes 18 - 36 mm
Electrical feeding 24V
4420088 – Rev. 1710
nekos products have been manufactured in accordance with safety standards and conforms to the
stipulations of current standards in force.
When correctly assembled, installed and used according to the present instructions, they will not
generate any danger for persons, animals or items.
Symbols used in the manual
This indication draw the attention about potential dangers for safety and
DANGER
health of peoples and animals.
INFORMATION
This information give further suggestions.
This indication draw the attention about potential dangers for the product
ATTENTION
itself.
WARNING
This indication draw the attention about potential damages to goods.
ENVIRONMENTAL
Environmental indication draw the attention about potential dangers for
INSTRUCTION
the environment.
2

Advertisement

Table of Contents
loading

Related Manuals for nekos K-LOCK

Summary of Contents for nekos K-LOCK

  • Page 1 When correctly assembled, installed and used according to the present instructions, they will not K-LOCK generate any danger for persons, animals or items.

  • Page 2: Table Of Contents

    MANDATORY RISK ANALYSIS AND PROTECTION MEASURES Contents The Nekos electrical actuators comply with the Machinery Directive (2006/42/EC), Standard IEC 60335-2-103 (Particular requirements for drives for gates, doors and windows) and other directives and regulations indicated in the attached Declarations of Incorporation and CE Conformity (at the end of the manual).

  • Page 3: Technical Information For Application And Operation

    2 m cable in silicone with three wires. K-LOCK can be combined with the 230V~ actuators of the INKA 356 series (S ³ versions) by requesting, when placing the order for the actuators, the inclusion of a...

  • Page 4: Electric Power Supply

    other Regulations listed in the attached Declaration of Conformity. With this marking, the  when placed in the ON position, it dialogues with the chain actuators can be sold and used throughout the European Union with no further actuator according to the operating logic sequence. requirements.

  • Page 5: Preparation Of Actuator For Assembly

    8.1. Preparation of actuator for assembly 8.2.2 Recessed assembly  Assemble the actuator in the recessed hole made previously on the window frame, taking Before starting assembly of the actuator, prepare the following material for completion, equipments and tools. care not to damage the cable. ...

  • Page 6: Electrical Connection

    When closing, first the chain of the actuator re- there is a power failure. enters completely and then the K-LOCK goes to 0 (the hook moves towards the center of the machine towards the power supply cable).

  • Page 7: 12.3. Led Light Signals

    Check that the power supply unit WITH ORANGE LED The power supply unit does not and safety switch are operating supply 24V LED Status Meaning properly. STEADY-ON Connection cable not connected Check all the electrical Internal memory write process in progress. Duration <...

  • Page 8: Declaration Of Conformity

    Mounting Instructions, and that the acceptance procedure was duly carried out and documented in an acceptance protocol by a specialist. Questa dichiarazione è fatta dal costruttore / This is declared by the manufacturer : NEKOS S.r.l. - Via Capitoni 7/5- 36064 Mason Vicentino (Vicenza) - Italy NEKOS S.r.l.

Table of Contents