Fault Codes - Prem-I-Air EH0533 Manual

• Remote control does not work:
Check batteries are correctly installed, and are not exhausted.
Make sure that the remote control is pointed towards the main unit
when being used.
• Water leakage
Drain hole slopes the wrong way
Drain tube not fitted correctly
• Water splashes out of the front of the appliance
Appliance has not been installed level.

FAULT CODES

If any error codes appear on the display, contact your local service
agent.
E2: Indoor room temperature sensor failure
E3: Outdoor temperatue sensor failure
E4: Indoor coil sensor failure
E5: Failure of upper fan motor
Page 13