Advertisement
INSTALLATION INSTRUCTION
Paloma - 523 LED Adjustable Beam
WTK-LED523, WHK-LED523
3. To secure the fixture to the track turn the lock
switch to its locked position. (See Figure 3)
4. Select the circuit you want the luminaire to be powered
on by rotating the circuit selection handle
to circuit 1 or 2. (See View A)
5. Switch the main fuse breaker and circuit breaker to "ON" position.
6. Place the wall switch in the "ON" position.
POSITIONING THE FIXTURE
7. After the light is on, rotate the luminaire's body
horizontally and vertically to aim it properly. (See Figure 4)
8. Rotate beam adjusting knob until desired beam is achieved -
clockwise for smaller beam, and counter clockwise
for larger beam. (See Figure 5)
WAC Lighting
www.waclighting.com
Phone (800) 526.2588 • Fax (800) 526.2585
WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. August, 2014
Headquarters/Eastern Distribution Center
44 Harbor Park Drive • Port Washington, NY 11050
Phone (516) 515.5000 • Fax (516) 515.5050
Figure 3
View A
View A
Circuit selection handle
1. Power on at circuit 1
2. Power on at circuit 2
Figure 4
Figure 5
Western Distribution Center
1750 Archibald Ave • Ontario, CA 91761
Phone (800) 526.2588 • Fax (800) 526.2585
Lock switch
(Lock position)
Advertisement
