Installation Of The Rockair - Tracplus RockAIR Owner's Manual

Installation of RockAIR
Aviation use
TracPlus does not hold any STCs or TSOs for the RockAIR. The RockAIR should be
installed in accordance with the requirements of the operator and the intended use.
Installation of the RockAIR is at the discretion of a duly licensed Aircraft
Maintenance Engineer or Aircraft Maintenance Technician (AME/AMT). The following
recommendations are appropriate for New Zealand or the United States, and may apply
in other countries.
AC43-14 Appendix 9
Under New Zealand Civil Aviation Authority (CAA) Advisory Circular AC43-14 Appendix
9, eligible aircraft can have the RockAIR installed as non-aeronautical equipment.
FAA 337
The power cable for the unit may be hardwired into the aircraft power system, and
the sensor cable may be connected to independent non-critical sensors. This is a
modification performed in the field by any approved AME/AMT by submitting an FAA
337 form or equivalent. Whether the installation qualifies as a major modification will be
at the discretion of the FAA Flight Standards District Office.
To support the installation process, TracPlus provides RockAIR owners with DO160G test
documentation. This is available on request from TracPlus and is included on USB with
the RockAIR Professional kit.
For further information, please email
North America (678) 782 8090
New Zealand 0800 872 275
Australia 1800 330 740
Rest of World +64 3 477 8656
support@tracplus.com or call as follows: