Maytag DWU8250AAX User Manual page 10

Options:
Indicator Light:
Temp Boost Sensor:
The Heating Delay light indicates that the main
Press the On button to assure the water is wash is being extended to heat the water to
heated to proper temperature for best cleaning proper temperature.
and drying results. If the water temperature is
low, the main wash will be extended and the
Adding a Forgotten Item:
Heating Delay light will turn on.
For best cleaning, the forgotten item should be
Press the Off button to eaneel the Temp Boost
Sensor. added early in the cycle.
1. Unlatch the door and wait until the sound of
Fan Dry Options:
circulating water stops.
Press the Heat button to turn the heating 2. Open the door and add the item.
element on during the fan dry period. This
option provides faster drying. 3. Pause before latching the door. The cycle will
continue at the point it was interrupted.
Press the Air button to turn the heating element
off during the fan dry period.
To Start Dishwasher:
After loading set the dial to the desired cycle.
Press button for desired options.
NOTE: Run the water from the hot water tap to
dear the line of cold water before
starting.
Press the door until it latches. The cycle will
begin with a drain prior to fill.
PAGE 9