Download Print this page

Promax CI-23 Manual

1.1 Description

The CI-23 is a serial portable printer for its connection to a level meter. With this

accessory it will be suitable to obtain maximum performance of this advanced

measurement equipment.

The printer connection allows to obtain, on site, printing for a pre-programmed

measurement sequence. This is a simple and effective way to get an installation archive

for a given place or get documentation related with level measurement, for further analysis.

Several PROMAX level meters incorporate an RS-232C interface, that allows,

moreover to print results, the remote control of the instrument, thus making possible data

collection and control from a personal computer.

The CI-23 option includes the following items:

* 24 columns serial portable printer CI-23

* mains adapter / battery charger unit for the printer AL-14

* spare ribbon cartridge

* connection cable between the level meter and the printer

* D-25 male-male adapter

* printer case DC-251

* this manual

12/99

PORTABLE PRINTER

CI-23

Table of Contents

Do you have a question about the CI-23 and is the answer not in the manual?

Page 1: Portable Printer
CI-23 1 GENERAL 1.1 Description The CI-23 is a serial portable printer for its connection to a level meter. With this accessory it will be suitable to obtain maximum performance of this advanced measurement equipment. The printer connection allows to obtain, on site, printing for a pre-programmed measurement sequence.
Page 2 Consult the level meter instruction manual in order to locate its RS-232C connector. 3 OPERATING INSTRUCTIONS Refer to the INSTRUCTION MANUAL to carry out printing reports. 3.1 CI-23 set-up Figure 1.- CI-23 keyboard [1] POWER LED [2] SET-UP [3] FEED [4] ON [5] OFF To initiate the set-up mode push the [2] SET-UP and the [4] ON keys.
Page 3 5 Min. Emulation :- Standard Normal Figure 2.- Example of CI-23 setup. 4 RS-232C CONNECTOR DESCRIPTION Through the RS-232C connector it is possible to control the level meter with a remote controller (personal computer), connect printers, etc. The connector signals are described in Table 1.