Summary of Contents for On The Moon SPACECRAFT
- Page 1 Owner’s Manual v1.0 OnTheMoon Luchterenstraat 25A 9031 Drongen Belgium www.onthemoon.be www.mathewlane.com © 2015-2016 All rights reserved.
- Page 2 _________________________________________________________________________________ CONNECTIONS - Back panel The OnTheMoon SPACECRAFT uses a standard IEC inlet with an on/off switch on the back panel. Using the voltage switch next to the IEC inlet, the unit can be set for 230V or 115V. 230V requires the use of 400mA slow blow fuses, while 115V requires the use of 800mA slow blow fuses.
- Page 3 The SPACE section is what really sets the OnTheMoon SPACECRAFT apart. The SPACECRAFT button activates this whole section. When not active, this whole section is mute. Muting (de-activating) the SPACE section can also be useful to listen to MID and/or SIDE in solo.
- Page 4 Dynamic Range = 106dB (ref +22dBu, 22kHz BW) Maximum Input Level = +22dBu (balanced, <1% THD) _________________________________________________________________________________ OnTheMoon SPACECRAFT © 2015-2016 All rights reserved. Concept & system design: Mathijs Indesteege aka Mathew Lane Electronics design: Wim De Roeck Project support:...
Need help?
Do you have a question about the SPACECRAFT and is the answer not in the manual?
Questions and answers