Table of Contents
Advertisement
Hard Disk Backup/Restore Function(Windows Vista)
[Backup and Restore Center] and [System Recovery Options] allow you create a backup of the entire hard disk data,
which can be used to recover from hardware failure.
Matsushita Electric Industrial Co., Ltd. will bear no responsibility for any damage suffered (including loss of data) as
a result of the use of this function.
Creating a backup of the hard disk data
To create a backup of the entire hard disk to another storage media (e.g., external hard disk): Use [Back up computer].
To create a backup of a file or a folder: Use [Back up files].
For further information, click
NOTE
Connect the AC adaptor and do not remove it until backup is complete.
Restoring the hard disk data
NOTE
This function does not work when you turn on the computer for the first time or just after you reinstall Windows.
Start and shut down Windows Vista, and then you can use the function.
Connect the AC adaptor and do not remove it until restoration is complete.
1
Turn on the computer, and when [Panasonic] boot screen disappears, press and hold
.
F8
If [Enter Password] is displayed during the following procedure, input the Supervisor Password or the User
Password.
2
Release your finger when [Advanced Boot Options] is displayed.
3
Press
to select [Repair Your Computer] and press
[System Recovery Options] appears.
4
Select the keyboard layout and click [Next].
5
Select [User name] and input [Password], then click [OK].
6
Click [Windows Complete PC Restore] and follow the on-screen instructions.
NOTE
If pressing F8 does not display [System Recovery Options], use the Product Recovery DVD-ROM.
A Perform the steps 1 to 7 of "Reinstalling Software" (
B Click [Run "System Recovery Options".] and click [Next].
C Follow the on-screen instructions.
24
(Start) - [Control Panel] - [Back up your computer].
.
Enter
page 27).
Advertisement
Table of Contents
