PowerTech MS-6114 Operating Instructions

Advertisement

Quick Links

READ THESE INSTRUCTIONS CAREFULLY BEFORE CONNECTING THIS TIMER TO MAINS POWER & YOUR ELECTRICAL APPLIANCES.
IMPORTANT
Don't plug in any appliance where the load exceeds 10A. Always ensure the plug of the appliance is fully inserted into the timer output. To clean
the timer, remove from the mains power and wipe it with a dry cloth. DO NOT IMMERSE THE TIMER IN WATER OR ANY OTHER LIQUID. The
manufacturer recommends heaters & similar appliances should not be connected to timers as they cannot be left unattended during operation.

FUNCTIONS

1. MASTER CLEAR BUTTON: Clear all data in memory including current time and all programs.
2. UP & DOWN BUTTONS: Set current time with buttons UP, SET & DOWN. Set programs combined with buttons UP, SET & DOWN. Set CD
combined with buttons UP, SET & DOWN. Press UP and DOWN buttons simultaneously to enter CLOCK mode under PROGRAM setting
mode or CD setting mode.
3. SET BUTTON: Set current time combined with buttons SET & UP. Set programs combined with buttons SET & UP. Set CD combined with
buttons SET & UP.
4. RANDOM BUTTON: Set or cancel RANDOM function.
5. CD (COUNTDOWN) BUTTON: Set or cancel CD function.
6. MANUAL BUTTON: Select modes (ON/AUTO/OFF) of timer & override programs or recall the overridden programs in setting programs.

FEATURES

10 On/Off programs with 1 minute step
Manual On/Auto/Manual Off
12/24 hour mode, summertime & random (turns on 10-31 minutes between 6:00PM and 6:00AM) functions selectable
Maximum of 99 hours 59 minutes 59 seconds CD (COUNTDOWN) function
16 combinations of single days or blocks of days available as follows:
FUNCTION
MO
TU
WE
TH
FR
SA
SU
MO, TU, WE, TH, FR, SA, SU
MO, TU, WE , TH, FRI
SA, SU
MO, TU, WE, TH, FRI, SA
MO, WE, FRI
TU, TH, SA
MO, TU, WE
TH, FRI, SA
MO, WE, FR, SU

INITIAL OPERATION

1. Plug the timer into a regular 240V power outlet and turn the power on. Leave for approximately 14 hours to charge the back-up battery.
2. Clear all current information by pressing the MASTER CLEAR button with a sharp object such as a pen or pencil after charging.
3. The timer is now ready to be set-up for use.

SETTING CURRENT TIME

1. Press the UP button or the DOWN button until the CLOCK icon displays on-screen.
2. Press the SET button for 2 seconds until "SET" displays on-screen and flashes. The "WEEK DAY" icon will flash at the same time. The timer
has changed to SET mode, so you can set the current time now.
3. Press the UP button or the DOWN button to set the "WEEK DAY".
4. Press the SET button once and release. The "HOUR" will flash, the "WEEK DAY" will stop flashing and remain on-screen.
5. Press the UP button or the DOWN button to set the "HOUR".
6. Press the SET button once time and release. The "MINUTE" will flash, the "HOUR" will stop flashing and remain on-screen.
7. Press the UP button or the DOWN button to set the "MINUTE".
8. Press the SET button once time and release, the time change to CLOCK mode.
9. To reset the incorrect time, repeat above steps.

OPERATING INSTRUCTIONS

DAY COMBINATIONS
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday
Full week
Monday - Friday
Saturday & Sunday
Monday - Saturday
Monday, Wednesday, Friday
Tuesday, Thursday, Saturday
Monday, Tuesday, Wednesday
Thursday, Friday, Saturday
Monday, Wednesday, Friday, Sunday
MS-6114

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MS-6114 and is the answer not in the manual?

Questions and answers

Summary of Contents for PowerTech MS-6114

  • Page 1: Operating Instructions

    MS-6114 OPERATING INSTRUCTIONS READ THESE INSTRUCTIONS CAREFULLY BEFORE CONNECTING THIS TIMER TO MAINS POWER & YOUR ELECTRICAL APPLIANCES. IMPORTANT Don’t plug in any appliance where the load exceeds 10A. Always ensure the plug of the appliance is fully inserted into the timer output. To clean the timer, remove from the mains power and wipe it with a dry cloth.
  • Page 2: Specifications

    SETTING PROGRAMS When verifying your programs ensure that settings do not overlap, especially when using the block option. If there are program settings overlapping, the timer ON or OFF will be executed according to program time, not by program number. Program OFF has priority over program ON.

Table of Contents

Save PDF