Advertisement
Con guration Method 2 - Easy Con guration Using Smart Wireless Setup
The MTL-300AN allows you to con gure its wireless settings easily using a
push switch if your wireless router supports WPS (Wi-Fi Protected Setup).
Follow the instructions on this page to con gure wireless settings using the
push switch.
NOTES
To perform wireless con guration using WPS, your wireless router must support WPS.
Please make sure that a wireless router supporting WPS is set up in your environment.
While performing this con guration, please temporarily move the MTL-300AN closer to your
wireless router to make it easier for both devices to communicate.
Depending on your wireless router, WPS may need to be enabled manually. For details, refer to
the operation manual that came with your wireless router.
If a security feature such as MAC Address ltering is enabled on your wireless router, disable it
temporarily so that the MTL-300AN can communicate with your wireless router.
It is recommended to use a router/access point that supports the 5 GHz band. Due to
interference and congestion, using the 2.4 GHz band may cause issues with real time voice
communications.
3 3
Press and hold the push switch at the front of the MTL-300AN. The WLAN LED and STATUS LED will start to blink Green together.
Release the push switch when the STATUS LED turns o while the WLAN LED keeps blinking (it may take 15sec for the STATUS LED to turn o after both LEDs started blinking).
STATUS
②
Con rm
these LEDs
WLAN
are blinking
Push Switch
①
Keep holding
Factory Default Con guration
How to reset the MTL-300AN to the factory default settings is explained.
1
Disconnect the AC plug of the MTL-300AN from the electrical outlet.
Electrical Outlet
MTL-300AN
AC adaptor
1
Connect the IP phones to the Ethernet Switch. Connect the MTL-300AN to the Ethernet
Switch using the network cable that came with the MTL-300AN. Connect the AC adapter
to the MTL-300AN and the AC adapter's plug to an electrical outlet.
IP Phone
Sample connection in Multi-Client Mode
Ethernet Switch
IP Phone
Network Cable
MTL-300AN
Con rm
③
STATUS LED
STATUS
is OFF
WLAN
Push Switch
MTL-300AN
④
Release the push switch
2
While reconnecting the AC plug to the outlet, press and hold the push switch at the front of
the MTL-300AN. Keep pressing and the factory default con guration will begin.
Electrical Outlet
②
Push Switch
MTL-300AN
①
Keep holding
AC adaptor
* Some IP phones may require additional network settings.
In such cases, refer to the manual that came with the IP phone.
* When turning on the MTL-300AN and the IP phones, be sure to
turn on the MTL-300AN rst. Do not press the push switch
when turning on the MTL-300AN.
②
PC
Optional
MTL-300AN
①
3 5
The MTL-300AN will start to communicate with your wireless router.
When the wireless con guration is successfully completed, the WLAN LED turns Green and the STATUS
LED turns/blinks Green.
Con rm
STATUS LED turns
or blinks Green
STATUS
Con rm
WLAN
WLAN LED
turns Green
- It may take a while to complete the wireless con guration
depending on your environment (up to 2 min).
3 3
When the WLAN LED turns from Green to Red, release the switch. The factory default
con guration is completed. After the factory default con guraton is completed, the
MTL-300AN will restart.
Green
①
WLAN
Push Switch
MTL-300AN
②
Release the push switch
2
Press the WPS button on your wireless router.
Con rm that your wireless router is ready for a wireless connection to be made.
Electrical Outlet
Wireless Router
- The name, position and shape of the WPS button will di er depending on your
wireless router. For details, refer to the operation manual that came with your
wireless router.
- Please use only one wireless router. If two or more routers are waiting for wireless
connections, the MTL-300AN will not be able to connect properly.
*If wireless con guration has failed, the WLAN LED will ash rapidly.
Read the notes above and start from
Trademarks
Wi-Fi Protected Setup(WPS) is a trademark or registered trademark of Wi-Fi Alliance.
Other company names and product names contained in this document are trademarks or
registered trademarks of their respective companies.
Red
WLAN
WPS
again.
2
Advertisement
