Polaris AfterDark AD151 Owner's Manual page 7

3 Install Chassis Assembly
Using the handles, lift the chassis assembly onto the installation base and secure.
To connect the electrical supply, check the model number of your light driver and refer to the
wiring connection requirements below for the proper configuration.
Model AD150, manual control light driver.
Main Power
120VAC
(Black)
Neutral
(White)
Ground
(Green)
Connect to incoming power
Model AD150, remotely controlled by Polaris
Sol 1000 or another external control system.
(Discard
this plug )
Main Power, Aux 1
120VAC (Black)
Neutral
(White)
Ground
(Green)
Connect to incoming power
Position and secure the cover onto the installation base/chassis assembly.
(Install Color Wheel
Control plug)
Color Wheel Control, Aux 2
120VAC (Red)
Screws
Ground Level
Installation Base
(Buried)
www.polarispool.com
Model AD151, white light only light driver.
Main Power
120VAC
(Black)
Ground
(Green)
Neutral
(White)
Connect to incoming power