Aerpro FMT280 User Manual

FMT280 Bluetooth Car FM Transmitter
User Manual
Thank you for choosing and buying the FMT280 Bluetooth Car FM
transmitter. To optimise the performance of the product please read this
manual carefully before use.
PRODUCT INTRODUCTION
The FMT280 Car FM transmitter is installed with a high-performance
Bluetooth module. It is able to play music from a mobile phone through
the car stereo via FM radio transmission. It supports Bluetooth hands-free
phone calls and can switch to music automatically once the phone call has
ended. You can enjoy music and answer phone calls simultaneously easily
using Bluetooth.
PRODUCT PICTURE
1. Mic
2. Play/Pause/Receive/Hang Up/Switch On/off BT(long press)
(FUNCTION BUTTON)
3. Next/FM CH+(long press)
4. Previous/ FM CH-(long press)
5. Digital display
6. Volume wheel +/-
7. Power Indicator/USB Output(5V/2.1A & 5V/1.0A)
8. Contact end (12V-24V)
FEATURES
Adjust the angle, suitable for different vehicles.
Support LED display and power on/off by software
Bluetooth hands-free
Support music playing via Bluetooth stereo
CVC technology cancels echo and reduces ambient noise.
Can power other equipment via 2 USB Ports. Max output 5V/2.1A
& 5V/1.0A
Stereo Bluetooth and FM transmitter
Automatically power-off memory
Volume adjustment at 360 degree and pick up calls by separate top
button easily
360 independent volume control
OPERATION GUIDE
Playing music
Power on by long pressing the function button for three seconds, and
power off by long pressing another three seconds.
When switched off, put the device in the cigarette lighter base. Device
will power on automatically if there is power being supplied. LED will
display 'BT'.
Press CH- and CH+ to play previous and next track. Press the function
button to play or pause.
Turn on the car's FM radio and adjust frequency of this device to match
the car radio. Music from the device can now be heard from the car stereo.
You can adjust the frequency of this device by following the instructions
below.
Frequency adjustment
Long press CH-/CH+ to frequency adjustment, LED display will show
frequency. Then press CH- and CH+ to adjust frequency from 87.5 to
108MHZ.
Turn the volume wheel button clockwise for volume up & anticlockwise
for volume down.
Pairing the Bluetooth and cell phone
Pair the cell phone with the device on first use. Please refer to the user
manual of your cell phone for specific details on Bluetooth connectivity.
1. While music is playing long press CH- and music will stop playing.
2. Turn on the Bluetooth hands-free device, and activate your cell
phone's Bluetooth function, then search for 'CarKit' on your mobile
phone.
3. Select 'Car Kit' device.
4. Enter the password '0000' if it is requested.
5. Select 'Car Kit' from the list on the mobile phone's paired devices,
then select 'Hands-free device' from authorised devices if need be.
Additional equipment connections:
The device will only connect automatically when powered on if it has
previously been paired.
Attention: Some phones can connect to the device automatically again
after a restart however some phones may need to be authorised for each
connection. You may set this as an 'Automatic connection' if needed. If
you require detailed instructions, please refer to your phone's user manual.
Using Bluetooth hands-free
(When the Bluetooth FM transmitter is on standby or playing music)
Making a call
When connected via Bluetooth, you can dial phone numbers on your
phone and the audio will automatically go through the cars speakers.
Answering a call
When connected via Bluetooth and phone has an incoming call, press the
function button to answer the call, then press CH- or CH+ to choose the
phone private talking mode or Bluetooth hands-free mode, press the
function button again to hang up the call.
Reject a call
When there is a call but you don't want to answer it, long press the
function button to reject the call.
Play music stored in phone
This device supports A2DP and can play music stored on your mobile
phone by transmitting the music to the car audio via the Bluetooth
hands-free FM transmitter. This results in higher quality sound.
According to your phone's manual, set the music player of the phone to
output via Bluetooth if audio is not playing through Bluetooth. Once it is
setup, the cell phone's music will transmit through the Bluetooth FM
transmitter and play from the cars radio system.
POWER-OFF MEMORY
When the device is powered off it will automatically memorise the
frequency in use and the point where the music has stopped and will
resume playing from that point when powered on next time. However,
when the storage device have been changed, removed or when errors have
been detected, the system will automatically restore to the default settings.