tactio CONCERO-85TX1 Quick Installation Manual

Quick Installation Guide
CONCERO-85TX1
85Mbps Powerline Ethernet Adapter
Introduction
The Wall Mount Powerline Ethernet Bridge can be used to bridge any
Ethernet device to your powerline networking with 85Mbps high speed.
No need to spend time and money professionally installing expensive
Ethernet cabling to share your high speed cable or DSL modem.
Sharing your high speed modem is as fast and simple as plugging the
devices in the wall. All with no new wires!
LEDS for Powerline Networking Status
PL Indicate powerline networking activity.
ETH Indicate Ethernet link activity.
PWR Power ready.
Ethernet Status
Ethernet Where you will connect 10/100M Ethernet network devices,
such as PCs, printer servers, and anything else you want to
put on your networks.
1
www.tactio.net
Installation
1. Simply plug into a power outlet and do not use a power strip or UPS
with the wall mount device.
2. Use a twisted-pair cable with RJ-45 plugs at both ends, and plug into
Ethernet device and Ethernet of Powerline Bridge 85.
Package Content
•
CONCERO-85TX1 Powerline Ethernet Adapter unit
•
Quick Installation Guide
•
Powerline Management Utility CD
•
Ethernet cable
2
Rev.1.01