Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for LG LP1214GXR
Summary of Contents for LG LP1214GXR
- Page 1 www.lg.com...
- Page 3 personal injury Failing to follow instructions and operating the product incorrectly will cause harm or damage. The severity of the possible consequences is indicated by the following symbols. property The meaning of the symbols used in this manual is shown below. This is the WRONG thing to do.
- Page 4 Do not place heavy objects Pull the plug out using the on top of the power cord, plug head not the cord. or bend or pinch the cord. Do not unplug while hands are wet. Doing so could result in electric The heat generated will cause Failure to follow this warning shock or fire.
- Page 5 If a gas leak occurs, ventilate in a damp the room well before operating the unit. Doing so will result in electric Failing to do so may cause Failure to do so may cause shock. damage and electric shock. explosion and fire. If the inside of the unit needs cleaning, can cause corrosion or damage to the unit.
- Page 6 If fluid from the batteries in the remote leaks out If you eat the fluid from inside the remote's and comes in contact with your skin or clothes, batteries, brush your teeth and see a doctor. wash well with clean water. Discontinue use of Discontinue use of the remote if the the remote if the batteries have leaked.
- Page 8 The Easy-to-read white LED display shows the operating state. Digital buttons(simple push Buttons) make changing settings quick and easy. Before moving the aire conditioner, drain the internal water in the collection tank completely using the Drain Outlet. HOLDERS...
- Page 9 Adjust the set temperature up or down, or adjust the timer delay time. Removes moisture from the heat exchangers and helps prevent odor from forming. This function can be activated from the remote only. Switches the temperature display between degrees Celsius (ºC) and degrees Fahrenheit (ºF).
- Page 10 Plug the power cord into its own dedicated, properly grounded outlet . Do not plug Other appliances into the same outlet; this could overload the outlet and create a fire hazard. Make sure the air conditioner and cord are positioned where they do not create a tripping hazard and will receive adequate ventilation.
- Page 11 Press down on the arrow and slide the battery cover on the back of the remote, then you can remove the cover. Insert two new AAA alkaline batteries into the battery compartment, being sure to note the proper polarity. Your air conditioner has a special place for convenient storage of the remote control.
- Page 12 You can see the active mode on the LED Display. This...
- Page 13 FAN SPEED In COOL and DRY modes, the (TEMP/TIMER) buttons adjust the set temperature up to 86°F (30°C) or down to 60°F(16°C), in one degree increments. at the same time, or by pressing the Press the TIMER button to see the delay time you set displayed on the LED display panel.
- Page 14 The AUTO SWING Press this button to switch the displayed temperature from ºF to ºC or vice versa.
- Page 16 For best performance, allow at least 20 in (50.8 cm) of air space behind the unit for good air circulation.
- Page 17 18" to 50" (46 to 127 cm) 18" to 50" (46 to 127 cm) 18" 9" 17" 17" (46cm) (23cm) (43cm) (43cm) 18"(46cm) 19"- 26" (48cm - 66cm) 27"- 34" (69cm – 86cm) 35"- 50" (89cm – 127cm) Please check your window length and choose the panels that will fit from the above table.
- Page 18 18" and 50" (46cm and 127 cm) Cut the adhesive foam seal A and C strips to the proper lengths, and attach them to the window sash and frame as shown. Cut the non-adhesive foam seal B strip to If desired, install the security bracket with a match the width of the window.
- Page 19 Insert the diffuser into the vent panel then slide the diffuser left to lock it. First insert diffuser into the vent panel fully and Use the type C screw to fix the diffuser more then slide it to lock. firmly in place, if desired.
- Page 20 Cut the adhesive foam seal A and C strips to the proper lengths and attach them to the window sash and frame as shown. Cut the non-adhesive foam seal B strip to match the window height. Insert the foam seal between the glass and the window frame to prevent air and insects from getting into the room.
- Page 21 Insert the diffuser into the vent panel and slide the diffuser down to lock. First insert diffuser into the vent panel fully and Use the type C screw to fix the diffuser more then slide it to lock. firmly in place, if desired.
- Page 22 Failure to follow the above precautions could result in electric shock or personal injury.
- Page 23 USE OF A DRAIN HOSE WHEN USING THE DRY MODE If you wish to use the DRY mode because the unit is running in high humidity or for other reasons, remove the drain cap and rubber plug from the back of the unit. Purchase and install a drain hose (1/2"...
- Page 24 If the air conditioner will not be used for an extended period of time:...
- Page 25 If a power failure occurs, turn the mode control to Off. When power is restored, wait 3 minutes to restart the air conditioner to prevent tripping of the compressor overload. This is normal. The air conditioner automatically shuts off when the room temperature equals or is less than the set temperature.
- Page 28 www.lg.com...