XOOFER RQ5 User Manual

Hands Free

While you're listening to your music, you can control
your Bluetooth device with the below action on your
RQ5 ear phones
Functions Operation
Volume up Short press "+"button
Volume down Short press "―"button
Last song Long press "+"button
Next song Long press "―"button
Pause Short press MFB once
Play Short press MFB once
4

Product Overview

2
1 3
4
5
6

Microphone

Multi-Function Buttons

Volume+/Previous song Volume-/Next song

Indicator light

USB charging port

Turning On | Off

Turning on:
Press and hold MFB for 4 seconds until
blue LED flashes
Turning off: Press and hold MFB button about 4
seconds until red LED flashes
1
Specifications
Bluetooth version: CSR8635|V4.0+EDR
Bluetooth profiles: Headset, Hands free, A2DP, AVRCP
Operating distance: 10M
Talk time: 4-6 hours
Standby time: 150 hours
Charging time: about 1.5 hours
Charging Port: Micro USB

Charging

RQ5 comes with a built-in rechargeable battery, prior
to using it, it is recommended to charge the battery
fully for the first time.
1. Plug another side of cable to the USB port of PC or
into a USB power charger
- Red light on: Charging
- Red light off: Finish charging
2.It will takes about 1.5 hours to finish charging
Language switch (English Chinese)
RQ5 support language switch – When RQ5 on working
mode, press both "volume +" and "volume -" together,
until you hear "voice function switch" or "语音功能切换",
then it can change the language of the voice prompt.
5

Connecting

1) Keep your Bluetooth device within 1 meter when
pairing;
2) Make RQ5 enter pairing mode as shown:
Ensure RQ5 is off. Press and hold Multi-Function Button
for approximately 8 seconds until red and blue LED flash
rapidly ;
3) Using your Bluetooth device, please scan/ search for
available Bluetooth devices select "RQ5" from the list of
devices shown;
4) If prompted, enter password or PIN No: "0000"
5) If prompted by your mobile phone to connect, select
"Yes"(this will vary among mobile phone models)
6) After successful connecting, blue LED of headset will
flashes twice every 4 seconds

Multi-pairing

RQ5 can connect with two Bluetooth cell phones at the
same time. The general pairing procedures are as follows:
1）Pairing RQ5 with device A
2）Turn on RQ5 and make it enter pairing mode again,
and pairing it with device B
3）Operate device A to connect with headset. RQ5 has
already connected with two devices in this moment
2
RQ5
Hands Free
RQ5 built-in microphone allows you to answer and end
calls. Please use the chart below to execute your
desired function.
Functions Operation
Cancel a call Short press MFB once
Answer a call Short press MFB once
Reject a call Long press MFB about 2
seconds until you hear a
tone
End a call Short press MFB once
Redial the last Double click MFB
number
Call transfer Press and hold MFB for 2
(headset to phone) seconds
Call transfer Press and hold MFB for 2
(phone to headset) seconds
Microphone mute Double click MFB
Cancel mute Double click MFB
3