Difrax 611 Quick Start Manual

Quick start guide
Breast pump

PRIOR TO EACH USE:

1) Assemble the splitter.
2) Unscrew the s-bottle's cap and teat.
3) Place the milk valve in the bottle and screw
the splitter onto the S-bottle.
4) Attach the milk tube to the front of the
splitter at 'milk'.
5) Attach the air tube to the top of the
splitter at 'air'.
6) Attach the outer shell to the milk tube.
7) Position the S-bottle on the pump.
8) Select the correct size of inner shell
and click it into the outer shell.
9) Attach the adapter to the pump
and plug it into an outlet or insert
4 AA batteries into the base of
the pump.
10) Insert the shell into your bra.
11) Press start '
12) Select suction setting.
13) Press 'start' again to commence
phase 1 of the expressing session.
14) Press on the let-down reflex
button ' ' to shorten or
lengthen phase 1
(automatically set to
3 minutes phase 1, then
phase 2).
'.