Advertisement
Quick Links
Light control
Touch keypad 1 (light line 1) on the module (N86T)
-Turn on the first line of light. Touch the same
keypad to turn off the first line of light.
Touch keypad 2 (light line 2)
on the module (N86T) - Turn
N86T
on the second line of light.
Touch the same keypad to
turn off the second line of
light.
Light line 1 and line 2 can
also be controlled by a remote
control (R86B), when R86B
is connecting with this N86T.
R86B
Curtain control
Touch keypad 1 on the module (N86C) - Turn on
the curtain. The curtain will stop turning on when
touch the same keypad.
N86C
Touch control key 2 on the
module (N86C) - Turn off the
curtain. The curtain will stop
turning off when touch the
same keypad.
The curtain can also be
controlled by a remote
control (R86B),
when
R86B is connecting with
this N86C.
R86B
NOTICE：
Indicator light of N86T/N86C is on means the line
is disconnected.
Indicator light of N86T/N86C is off means the line
is connected.
After the power is recovered from power cut, all the
lines are disconnected from N86T/N86C ( Indicator
lights of N86T/N86C are on).
Installation and Operation Guide
N86T Touch module control
N86C Curtain control
Model: N86T
Security
Security
Technology
Technology
Vogue
Vogue
V01
Model: N86C
Innovation
Innovation
Advertisement
Summary of Contents for Napad N86T
- Page 1 Curtain control Light control Installation and Operation Guide Touch keypad 1 (light line 1) on the module (N86T) Touch keypad 1 on the module (N86C) - Turn on N86T Touch module control -Turn on the first line of light. Touch the same the curtain.
- Page 2 Step 2: Put the embedded box into the wall hole; 96 mm make sure it is in the same plane with the Enter the setting mode of N86T/N86C: When the wall and fix with cement. indicator light on the keypad is off, press the...