LifeSize Communications. Trademark Acknowledgments LifeSize® is the trademark of LifeSize Communications Inc. All other trademarks are the property of their respective owners. Patent Notice For patents covering LifeSize®...
Documentation CD Note: The VISCA port on the back of the LifeSize SDI Adapter is reserved for future use. Before you connect the Sony EVI-HD1 camera to the LifeSize SDI Adapter, refer to the product documentation that accompanies the camera for additional information about safety precautions and installation.
Page 4
You must set the SYSTEM SELECT switch before connecting the camera to an AC outlet. 2. Connect one end of the VISCA cable included with the LifeSize SDI Adapter to the VISCA IN port on the back of the Sony EVI-HD1 camera and the other end to one of the RS-232 serial ports on the LifeSize codec.
When you use the LifeSize remote control to control the Sony EVI-HD1 camera, a blue LED flashes on the front of the LifeSize SDI Adapter to indicate that the remote control is functioning properly. If the VISCA cable is properly connected, but the camera is not responding to commands from the LifeSize remote control, check the following: •...