Page 2
Maximum Balanced Output Level -2 dBV If you’re only using the Bass • Studio-quality Direct Out bottom plate to install), a 9-volt setting is Direct Out ‘ON’ and • T he Bass Preamp’s default • Use MID FREQ control to select Preamp for its 1/4” Output, put Noise Floor* -98 dBV AC adapter such as the Dunlop BUFFER 1/4” OUT bypass ‘ON.’ • Constant Headroom Technology ™ setting is DIRECT OUT ‘ON’ midrange frequency to be THD 0.03%, 1 kHz it at the beginning of your chain ECB003/ECB003E, a DC Brick ™...
Need help?
Do you have a question about the MXR M81 and is the answer not in the manual?
Questions and answers