Qwerkytoys Qwerkywriter Quick Start Manual

Contents:
Qwerkywriter Keyboard, Micro USB charging cable
& Quick Start Guide.

Charging your Qwerkywriter!

Using the included micro USB cable, plug it into any USB hub or a
powered USB port (Be sure to check the correct orientation before
inserting the micro USB. Smaller lip is UP). It takes 2-3 hours to fully
charge the Qwerkywriter. After it's fully charged, the red light goes out.
A single charge can hold upto 1 to 3 months of heavy use. The 'Low
battery indicator' LED (see over - LED's Explained) will let you know
if you need to recharge your Qwerkywriter. The Qwerkywriter will
automatically go to 'Power Save Mode' after 1 minute of inactivity. But
you can always power off the device as well. Powering OFF, turning
back ON, and pressing the CONNECT button will also allow you to
quickly connect to other devices.
This does NOT connect the Qwerkywriter via USB. The USB port only
CHARGES the Qwerkywriter.

Integrated Tablet Stand

The Qwerkywriter features an integrated tablet stand that can support a
wide range of tablets up to 10 inches and 1/2 inches thick. This includes
almost all generations of iPads, iPad Mini, Samsung Galaxy, Nexus, and
more. It can support both portrait and landscape modes.

The Qwerky Key

button is our logo, but it also doubles as either the WIN button
The
(Windows) or the CMD button (MacOS).
For detailed info, visit www.qwerkywriter.com/pages/gettingstarted for a video tutorial.
Qwerkywriter
Qwerkytoys, Inc.
712 Bancroft Road, Suite 234, Walnut Creek, CA 94598
Email: support@qwerkytoys.com

Quick Start Guide

Plug into spare USB port to charge Connect to miniUSB port on rear of keyboard.
Charging takes 2-3 hours
twitter.com/qwerkywriter
facebook.com/qwerkytoys