CDVI PS1A12VS User Manual

Protection
Over-voltage protection
Over-current protection
Short circuit protection
Over charge protection
Over discharge protection
Self-recovery when fault condition remove
Caution
- Make sure the power supply input voltage and the local grid voltage matching before
using.
- The UPS is to be installed in a controlled environment.
- Only suited for permanently powered systems.
- Make sure the power supply is well ventilated.
- It is mandatory to ground the power supply.
2
- Use 2,5 mm gauge cable.
- Improper storage and installation environment may deteriorate insulation,
shorten components life and cause malfunctions.
All content, specifications and availability subject to change without prior notice.
CAUTION
Non-professional maintenance
do not disassemble
User Guide
PS1A12VS - PS2A12VS
- Read carefully this user guide before activating and using.
- Use this equipment only for an indoor adapted application.
- Mounting, maintenance and repair must be carried on by a skilled and authorized staff.
- The activation is easy, but a correct handling and an appropriate maintenance are
mandatory to keep the power supply working perfectly.
Mounting
The UPS must be mounted firmly and securely.
Top view
Rear view
Cable Entry
Mounting Holes

LED description

①Red
AC POWER
②Green
DC OUTPUT
③Amber
BATTERY CHARGE
④Red
BATTERY LOW VOLTAGE
Situation
Battery in charging
Battery in full charged
No AC, V-battery > 11±0.3V
No AC, 10±0.3V<V-battery<11±0.3V
No AC, V-battery < 10±0.3V
- PS3A12VS - PS5A12VS
Right side view
①RED ②GREEN ③AMBER ④RED
on on
flash off
on on on
off
on on
off off
on on on
off
off off off off