1
SPY
SPY
P
P
INT
INT
Getting started
COMPONENTS
Wireless backup system
Model:
BLACKBOX-4G
(controller included with TINY
4G
)
Quick start guide
v1.0
1
1) 12V power
1
Getting started
jack
2) Solar panel
2
Setup of the controller
jack
www.spypoint.com
under Support section
2
Slot for instal-
1-888-779-7646
lation strap
tech@spypoint.com
v1.0
3
Battery case
4
BUSY LED
5
Antenna
6
Viewing
4
screen
1
5
7
SD card slot
6
2
8
SIM card slot
7
9
Navigation
8
3
buttons
9
10
11
10
Battery switch
1) The controller can be powered from an
external 12-volt DC input such as a 12V
11
ON/OFF
battery or a 12V adapter, each sold sepa-
rately.
BATTERY INSTALLATION
2) Allows the user to connect a solar panel
(SP-12V) to maintain the charge of the
We recommend the use of new batteries to ensure a maximum
lithium battery pack (LIT-09/LIT-C-8),
performance of the device. Rechargeable AA batteries are not
sold separately.
recommended.
Allows the user to install the controller using
the installation strap included.
Insert 6 AA batteries (alkaline or lithium) or
a rechargeable lithium battery pack (LIT-09/
LIT-C-8, sold separately).
Lights up when the controller records a file,
transfer photos or searches for the cellular
signal.
Allows wireless communication between the
6 alkaline
controller and the camera.
AA batteries
Allows the user to access the main menu, see
Battery switch position (depending on the power source)
battery level and view photos.
Power source
An SD card is required to record photos. The
controller accept SD/SDHC memory cards,up
• 6 AA
to 32 GB capacity (not included).
• 12V
• 12V + 6 AA
An SIM card is required for cellular functions.
•
LIT-09*
Buttons to set the controller.
• 12V +
LIT-09*
• Solar panel +
LIT-09*
• /: Navigate in the interface and modify
the selection
*
Rechargeable lithium battery pack, sold separately (LIT-09) or with
• OK: Select
a charger (LIT-C-8).
• BACK: Return to the previous menu
Allows the user to select the power source
INSERTING THE MEMORY CARD
according to the type of batteries used (ALK/
LIT-09).
Allows the user to turn on/off the controller.
INSERTING THE SIM CARD
Lithium battery pack
LIT-09/LIT-C-8
BLACKBOX AND CAMERA INSTALLATION
Battery switch position
ALK
1
LIT-09
ORIENTATION
OF THE BLACKBOX
UNIT
2
Insert a SD/SDHC memory card in the
card slot (up to 32 GB capacity). The card
HEIGHT
is inserted correctly when a click is heard.
OF THE TWO
DEVICES
Before
inserting
or
removing
a
memory card, always turn off the
controller to prevent loss or damage of the
photos already recorded.
Carefully insert a SIM card in the card slot,
gold contact area facing up.
Before inserting or removing a SIM
card, always turn off the controller.
SIGNAL STRENGHT
TREE
SIGNAL
STRENGHT
Need help?
Do you have a question about the BLACKBOX-4G and is the answer not in the manual?
Questions and answers