Advertisement
Quick Links
Cal. 9015/90S5 Assembly manual
9015 Appearence
Oscilating weight side
1. Setting movement on the movement holder.
Set movement as below pictures show. (* Movement holder is enclosed with the products.)
Stem
2. Setting the metal ring on the movement.
See below pictures and set the ring on boss of 1H/7H position. The dent of 3H stem position will be marker.
Note on setting 7H side at first when setting the ring. ( * The metal ring is enclosed with the product.)
Also, note on below point when you set the ring.
- Not to scratch on date dial (9015)
- Not to uplift or slip from movement.
Dent(1H）
stem position
Dent（7H）
7H side
①
1H side
④
Dial side
Boss (1H）
Boss (7H）
7H side
②
1H side
1H side
⑤
1 / 3 Page
90S5 Appearence
Dial side
After assembling
7H side
③
⑥
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Citizen Miyota 90S5
Summary of Contents for Citizen Miyota 90S5
- Page 1 Cal. 9015/90S5 Assembly manual 9015 Appearence 90S5 Appearence Dial side Oscilating weight side Dial side 1. Setting movement on the movement holder. Set movement as below pictures show. (* Movement holder is enclosed with the products.) Stem 2. Setting the metal ring on the movement.
- Page 2 Pull the crown out to C position Mainspring winding Turn the crown counter-clockwise, stop right after changing the date. *90S5: A=Mainspring winding / B=Time adjusting / C=N/A C:) Fit each hands standing straight up as following order. 1 Hour hand 2 Minute hand...
- Page 3 5. Case fitting a) Push the crown back to A position, and pull out the interim stem as the following picture shows. *The stem can be pulled out easily by pushing the button near the stem. Push the button and pull out the interim stem b) Clean inside the case by blowing the air into the case.
Need help?
Do you have a question about the 90S5 and is the answer not in the manual?
Questions and answers